Aukey EP-B40 Manual

Package Contents

• Magnetic Wireless Earbuds
• Micro-USB Cable
• Three Sets of Ear-Tips (S / M / L)
• Carrying Pouch
• User Manual
• Warranty Card

Specifications

Product Diagram

Getting Started

Charging

Fully charge your earbuds before first use. Before charging, make sure the earbuds are turned off. To charge, simply connect one end of the micro-USB cable to a USB charging port and the other end to the input port on the earbuds. When the red LED indicator light turns blue, your earbuds are fully charged and ready for use. Charging takes around 1.5 hours.

Turning On / Off

Pairing

Starting with your earbuds powered off:

1. Press and hold the multi-function button until the LED flashes blue and red alternately
2. Turn on the pairing function of the device you want to pair with the earbuds
3. In the list of available devices, find and select "AUKEY EP-B40"
4. If a code or pin is required for pairing, enter "0000"

Simultaneous Pairing with Two Devices

1. Follow the instructions in the "Pairing" section to pair the earbuds with Device A
2. Once paired, disable wireless function on Device A and turn off the earbuds
3. Follow the instructions in the "Pairing" section to pair with Device B
4. Once paired with Device B, reactivate wireless function on Device A and select "AUKEY EP-B40" in the list of paired devices
5. You can now make and receive calls from either of the two paired devices

Notes

• To reset the earbuds, power on the earbuds and then hold volume +, volume -, and multi-function button simultaneously until the LED indicator flashes red for 2 seconds. Once the pairing list is cleared, you will hear a tone; and when you turn on the earbuds next time, the earbuds will automatically enter into pairing mode
• The earbuds will automatically shut down after 5 minutes in pairing mode if no devices are paired
• If your paired device is turned off or manually disconnected, the earbuds LED indicator will flash blue once every 8 seconds and the earbuds will shut down after 5 minutes
• The maximum wireless operating range is 33ft (10m). If you exceed this range, the earbuds will disconnect from your paired devices and you will hear a tone. The connection will be re-established once you re-enter the wireless range within 15 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous "Pairing" steps

Music and Calls Control

Making Calls

Once paired with your smartphone, making and answering phone calls can be managed via the in-line remote

Streaming Audio

Once paired, you can wirelessly stream audio from your device to your earbuds. Music will automatically pause when you receive an incoming phone call, and resume once the call has ended.

FAQ

The earbuds are on, but not connecting with my device

To connect the earbuds with your device, you need to enter pairing mode. Follow the instructions in the "Pairing" section of this manual.

I have established a connection with my smartphone but can't hear any sound

Double-check the volume level on your smartphone and the earbuds. Some smartphones require you to set up the earbuds as an audio output device before the audio can be transmitted. If you are using a music player or other device, please make sure it supports the A2DP stereo music profile.

The sound is not very clear or the caller cannot hear my voice clearly

Adjust the volume on your smartphone and the earbuds. Try getting closer to your smartphone to rule out the possibility of interference or wireless range-related issues.

Can I use the earbuds while they are charging?

No.

What is the wireless range of the earbuds?

The maximum range is 33ft (10m). However, the actual range will depend on environmental factors. For optimal performance, keep your devices connected with the earbuds within a 15ft-25ft range and make sure that there are no major obstacles (like reinforced steel walls) between the earbuds and your devices.

My earbuds won't turn on

Try charging the earbuds for a while. If the earbuds still won't power on, please contact our support team at the address below.

Product Care & Use

• Please keep away from liquids and extreme heat
• Do not use the earbuds at high volume for extended periods, as this may cause permanent hearing damage or loss

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.

Amazon US orders: support.us@aukey.com
Amazon EU orders: support.eu@aukey.com
Amazon CA orders: support.ca@aukey.com
Amazon JP orders: support.jp@aukey.com

*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.

Notice for US

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation

FCC rules

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Relocate the receiving antenna
• Increase the separation between equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
• Consult the dealer or an experienced radio / TV technician for help

Videos

Aukey Latitude Wireless Earbuds EP-B40: Review Video

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Aukey EP-B40 Manual