AUKEY Wireless Sport Earbuds EP-B4 Manual

AUKEY Wireless Sport Earbuds EP-B4 Manual

Advertisement

AUKEY Wireless Sport Earbuds EP-B4 Manual

Package Contents

Wireless Sport Earbuds
Micro-USB Cable
Three Sets of Ear-Tips (S / M / L)
Carrying Pouch
User Manual
Warranty Card

Product Diagram

Product Diagram Step 1
Product Diagram Step 2

Specifications

Model EP-B4
Technology BT 4.1, A2DP, AVRCP, HSP, HFP
Chipset CSR8635
Microphone Noise Reduction 6th generation dual-mic cVc
Microphone Sensitivity 42dB ±3dB
Frequency Range 20-20KHz
Charging Input DC 5V
Charging Time 2 hours
Play Time ~4 hours
Talk Time ~4.5 hours
Standby Time 165 hours
Battery Li-Polymer (80mAh)
Operating Range Up to 10m / 33'
Weight 16.4g / 0.58oz

Getting Started

Fully charge your headphones before first use. To charge, simply connect one end of the included micro-USB cable to a USB charging port and the other end to the input port on the headphones. When the indicator light changes from red to blue, your headphones are fully charged and ready for use. Charging takes around 2 hours.
Getting Started

Turning On / Off

  • To power on, press and hold the multi-function button until the LED indicator flashes blue, and you will hear an ascending tone
  • To power off, press and hold the multi-function button until the LED indicator flashes red, and you will hear a descending tone

Pairing

Starting with the headphones powered off:

  1. Press and hold the multi-function button until the LED flashes blue and red alternately
  2. Turn on the pairing function of the device you want to pair with the earbuds
  3. In the list of available devices, find and select "AUKEY EP-B4"
  4. If a code or pin is required for pairing, enter "0000"

Simultaneous Connection with Two Devices

  1. Follow the instructions in the "Pairing" section to pair the earbuds with Device A
  2. Once paired, disable wireless function on Device A and turn off the earbuds
  3. Follow the instructions in the "Pairing" section to pair with Device B
  4. Once paired with Device B, reactivate wireless function on Device A and select "AUKEY EP-B4" in the list of paired devices
  5. You can now make and receive calls from either of the two paired devices

Notes

  • The earbuds will automatically shut down after 5 minutes in pairing mode if no devices are paired
  • If your paired device is turned off or manually disconnected, the earbuds LED indicator will flash blue once every 8 seconds and the earbuds will shut down after 5 minutes
  • The maximum wireless operating range is 33ft (10m). If you exceed this range, the earbuds will disconnect from your paired devices and you will hear a tone. The connection will be re-established once you re-enter the wireless range within 15 minutes. The earbuds will automatically reconnect to the last-paired device. To connect with other devices, repeat the previous "Pairing" steps

Music and Calls Control

Answer / End a call Press the multi-function button once
Adjust the volume Press volume + / - once
Redial last-called number Double-press the multi-function button when in standby
Reject an incoming call Double-press the multi-function button
Mute / Resume Double-press the multi-function button during a call
Microphone switch Press and hold volume + for 1 second during a call to switch between the microphone and your phone for talking
Phone switch Double-press the multi-function button during a call to switch between two mobile phones

Streaming Audio

Once paired, you can wirelessly stream audio from your device to the headphones. Music will automatically pause when you receive an incoming phone call, and resume once the call is ended.

Play / Pause Press the multi-function button once
Volume control Press the volume + / - once
Next / Previous track Press and hold the volume + / - for 1 second

LED Indicator Status
Blue & red flashing alternately Pairing mode
Blue flashing once every 8 seconds Connected / Playing music / In call
Red flashing once every 8 seconds Low battery
Blue flashing twice every second Incoming call
Red on Charging
Blue on (after charging) Fully charged

FAQ

The headphones are on, but not connecting to my device
In order for both devices to establish a connection, you will need to put them in pairing mode. Please follow the instructions in the "Pairing" section of this manual.

I have established a connection with my smartphone, but I'm not hearing any sound
Please double-check the volume level on your smartphone and the headphones. Some smartphones require you to set up the headphones as an audio output device before audio can be transmitted. If you are using a music player or other device, please make sure it supports the A2DP profile.

The sound is not very clear or the caller cannot hear my voice clearly
Please adjust the volume on your smartphone and the headphones. Try getting closer to your smartphone to rule out the possibility of interference or wireless range-related issues.

Can I use the headphones while they are charging?
No.

Product Care & Use

  • Keep away from liquids and extreme heat
  • Do not use headphones at high volume for extended periods, as this may cause permanent hearing damage or loss

Warranty & Customer Support

For questions, support, or warranty claims, contact us at the address below that corresponds with your region. Please include your Amazon order number and product model number.

Amazon US orders: support.us@aukey.com
Amazon EU orders: support.eu@aukey.com
Amazon CA orders: support.ca@aukey.com
Amazon JP orders: support.jp@aukey.com

*Please note, AUKEY can only provide after sales service for products purchased directly from AUKEY. If you have purchased from a different seller, please contact them directly for service or warranty issues.

Brand

Documents / Resources

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download AUKEY Wireless Sport Earbuds EP-B4 Manual

Advertisement

Need help?

Need help?

Do you have a question about the EP-B4 and is the answer not in the manual?

Questions and answers

Table of Contents