Positioning Documents (No Adf) - Canon CanoScan FB1200s Product Manual

Positioning Documents (No ADF)

Documents must be placed on the document glass to be scanned. The instructions below are for manual
positioning. If you are using the automatic document feeder (ADF) option, please see Chapter 3.
1. Lift the document cover.
2. Place the document face down.
Orient the document face down on the document glass with the top edge at the back of
the scanner (the edge closest to the hinges of the document cover). Align the edges of the
document with the alignment mark.
3. Close the document cover, being careful not to dislodge the document.
Top Edge
Bottom Edge
Alignment Mark
29