Problems With The Automatic Document Feeder (Adf-S9) - Canon CanoScan FB1200s Product Manual

Problems with the Automatic Document Feeder (ADF-S9)

Documents Are Not Scanning
Cause 1:
Solution:
Cause 2:
Solution:
Cause 3:
Solution:
Cause 4:
Solution:
Cause 5:
Solution:
Cause 6:
Solution:
Frequent Misfeeds
Cause 1:
Solution:
ADF power not on
Ensure that the ADF option cable is correctly connected to the AC adapter and
that the power cord is plugged into a functioning electrical outlet.
ADF connector cable not attached
Connect the ADF connector cable to the option cable as specified.
[Automatic Document Feeder] not selected in ScanGear CS-S or Plug-in
Module CS-S
Select the [Automatic Document Feeder] option in either program.
Document(s) incorrectly placed in ADF
Reposition the document(s) correctly.
ADF cover not closed properly
Close the ADF cover completely.
Paper jam
Clear the paper jam. (See p. 70)
Paper dust accumulated on separator or separator damaged
Clean or replace the separator.
(See p. 63)
(See p. 82)
(See p. 59)
(See p. 61)
(See p. 67)
96