Problems With Software Installation - Canon CanoScan FB1200s Product Manual

Problems with Software Installation

Installation is unsuccessful
Cause 1:
Solution:
Cause 2:
Solution:
Nothing displays when the CanoScan Setup Utility CD-ROM is placed in the drive
Cause:
Solution:
Installation does not seem to be working (Windows)
Solution:
Insufficient memory to run the installer program
Close other software programs that are running and reinstall
Insufficient free hard disk space
Delete or transfer unnecessary files from the hard disk and reinstall. Refer to
the Getting Started guide pages 20-21 for the required hard disk space
CD-ROM will not automatically run the CanoScan Setup Utility
Start the CanoScan Setup Utility manually (See Windows:
Manually install the software by clicking the [Start] button, selecting [Run]
and typing one of the command lines below into the box. If your CD-ROM
drive is labeled other than [D:], substitute the appropriate letter, such as [E:]
or [F:], in the lines below.
To install ScanGear CS-S:
To install ScanGear Toolbox CS:
To install Adobe Photoshop 5.0 LE:
To install Caere OmniPage Limited Edition:
To install Adobe Acrobat Reader 3.0:
To view the electronic manuals included on the CanoScan Setup Utility CD-ROM,
open the individual PDF files in the [D:\MANUAL] folders.
p. 36, or Macintosh:
[D:\Scangear\English\Disk1\Setup.exe]
[D:\Toolbox\English\Disk1\Setup.exe]
[D:\Photosle\English\Setup.exe]
[D:\Ople\Disk1\Setup.exe]
[D:\Acroread\English\Ar32e301.exe]
p. 38)
86