Setting Bluetooth - Canon SELPHY ES1 User Manual

Setting Bluetooth

To use Bluetooth, the printer's model and security settings must be set in advance.
1
Disconnect the computer or camera if it is connected to the printer,
or remove the memory card if it is inserted.
Printing is done according to the setting value specified in [Printer Settings] (p. 48).
2
Install the Bluetooth Unit.
Insert Bluetooth Unit BU-20 into the USB port on
the printer.
3
Display the [Printer Settings] menu (see Making Printer Settings
(Various Useful Functions) steps 1 and 2 on page 49).
4
Press the
and press the SET button.
5
Press the
press the
The following table summarizes the setting items and their functions.
Device name
Security
Passkey
Deny Access
Reset
*
Default setting
or button to select [Bluetooth]
or button to select the desired setting item, and
or button to set the item.
Select a name from Canon ES1-1
name used when the target device (this device) is selected
from the mobile phone. This setting distinguishes this device
when there are two or more Bluetooth-compatible devices
capable of communications.
Select either [On] or [Off]
the printer and mobile phone must be entered when
connecting to the printer.
The passkey refers to an identification number to be
determined. It is used to prevent incorrect access from other
Bluetooth devices. When [Security] is set to [On], press the
SET button and set the key (4-digit number) to enter on the
mobile phone to enable printing. The default passkey is
"0000".
Select either [On] or [Off]
searching and printing from Bluetooth devices.
Returns Bluetooth settings to their defaults.
*
to ES1-9. This is the
*
. When set to [On], the passkey for
*
. Selecting [On] will disable
45