Canon SELPHY ES1 User Manual page 70

Print is not ejected.
Paper has jammed inside the
printer.
The print receptacle cover
did not open.
The printer's power button lights red without the camera's LCD monitor displaying
any error message.
There is a malfunction in the
printer.
Print quality is not good.
The ink sheet or paper is
dirty.
Condensation has formed
inside the printer.
Faint stripes appear in the print.
Dust has accumulated inside
the printer.
Printed images are distorted.
The printer is too close to a
TV, video game machine, or
other electromagnetic
source.
The printer is too close to a
stereo speaker, large motor,
or other strong magnetic
source.
There is not enough ink left for the allotted sheets in the set.
You turned the printer's
power on and off repeatedly.
You pulled on the ink sheet.
68
Remove the cover below
the paper-handling slot
(the cover can be opened
by laying the printer down,
placing your fingers on
both sides of the cover and
lifting up) and remove the
jammed paper.
Re-attach the cover.
If the print receptacle cover does not open automatically
and paper gets jammed, press the print receptacle button
on the left side of the operation panel to open the print
receptacle cover and remove the jammed paper.
Remove the paper from the paper-handling slot and take
up any slack in the ink sheet. Turn the printer's power off
and turn it on again.
Use a clean cartridge.
Store the cartridge so that dust does not accumulate on it.
Wait for condensation to evaporate (p. 13).
Remove the dust inside the printer using the cleaner unit
(p. 66).
Move the printer so that it is at least 1 meter (3.3 ft.) away
from the electromagnetic source.
Move the printer away from the strong magnetic source.
Please avoid turning the printer's power on and off
needlessly as the printer initialization consumes ink. There
may not be enough ink left for the allotted sheets in the
set.
Do not forcefully pull on the ink sheet.