Printing - Canon SELPHY ES1 User Manual

6
Press the MENU button.
The display returns to the [Printer Settings] menu. Pressing the MENU button again
returns the display to the main menu.

Printing

1
Disconnect the computer or camera if it is connected to the printer,
or remove the memory card if it is inserted.
Printing is done according to the setting value specified in [Printer Settings] (p. 48).
2
Install the Bluetooth Unit.
Insert Bluetooth Unit BU-20 into the USB
port on the printer.
3
Send the image to the printer from the
mobile phone or PDA.
For details on how to print or make Bluetooth
connections from a mobile phone or PDA, read the user
guide of the mobile phone or PDA you are using.
When selecting the model name, select "Canon ES1-
x" (x stands for the 1-digit number you set on page 45).
During communications, the Bluetooth screen is
displayed on the printer's LCD monitor.
4
Printing starts after the data transmission is complete.
During transfer, Bluetooth Unit BU-20 blinks blue.
interrupt the
procedure again.
•Image quality may become coarser if you print on postcard size or L size paper. If this
happens, we recommend printing on card size paper.
•Printing cannot be canceled by pressing the PRINT/STOP button when printing
wirelessly.
5
End printing.
Either remove the Bluetooth Unit from the printer, or turn the printer off.
46
communications.
Bluetooth
During data transfer, do not
If communications are interrupted, do the
To be
Bluetooth screen