Canon SELPHY ES1 User Manual page 73

Message
Could not print
XX images
No Image.
Hardware Error
Cartridge cover
is open
This camera
cannot print B/W
Insert memory
card to print
Cartridge has
been changed
Cartridge not
compatible
Communication
error
Disconnected
Print output tray
is full
You tried to print xx of the following images at the DPOF setting:
-An image taken with a different camera or recorded in a different
type
-An image altered by a computer
-An image with a data size that is too big
-An image that is corrupted
Check whether the image's size matches the camera's pixel capacity.
If the size is not appropriate, resize the image and convert it as
necessary to a JPEG image that the printer can display. Limit the size
of image files to less than 8000 x 6000 pixels.
The memory card does not contain any images. Insert a memory card
recorded with images.
The inserted memory card does not contain any images that can be
read.
The image file name (folder name) sometimes cannot be recognized if it
contains double-byte characters (Japanese, Chinese or Korean).
Change double-byte characters to single-byte alphanumeric characters.
Print data that has been edited or processed on a personal computer
from the personal computer.
Check whether or not an error other than a cartridge error has
occurred. Turn the printer and camera power off and turn it on again.
If the error message does not clear, contact a Canon Customer
Support center for assistance.
Close the cartridge cover, making sure the cartridge cover lever
slides down into its locked position.
Black and white printing is not possible when the camera is
connected (Except when the
LCD monitor.). Insert a memory card to print.
The cartridge was changed after the print menu was displayed.
Change back to the original cartridge or change the print settings.
Use a cartridge that is compatible with this printer.
Turn the printer, camera and computer power off and turn it on again.
Check Communication Settings for Cameras (p. 7). If the error
message continues to display, contact a Canon Customer Support
center for assistance.
Make sure that the printer and the sender are located within
communications distance of each other.
Check the sender's power supply.
Remove accumulated paper from the print receptacle.
Remedy
(PictBridge) is displayed on the
71