Canon PIXMA iP6000D Quick Start Manual page 77

Problem Possible Cause
Printer port error
Writing Error/Output
Error/
Communication
Error
Cannot print with Size of loaded
Automatic Duplex paper is incorrect
Printing
Incorrect paper size
is selected
Printer is not ready
"Error No.: 300" *
Printer is not
properly connected
Printer you want to
use is not selected
on the Printer
up menu on the
Print Print dialog box.
Print Print
Waste ink absorber
almost full**
"Error No.: 1700"*
Inner cover is open
when printing
"Error No.: 1851"* starts
Verify the printer port status.
1. Click Start Start Start, right-click My Computer Start
When using versions of Windows other than Windows XP, right-click My
Computer on the desktop and select Properties Computer
Computer Computer
2. Click the Hardware
Serial Bus controllers, and USB Printing Support Serial Bus controllers
Serial Bus controllers Serial Bus controllers
When using Windows Me or Windows 98, click the Device Manager
Double-click Universal Serial Bus controllers
3. Check whether the General
Ensure that the size of loaded paper is suitable for Automatic Duplex Printing
Check the Paper Size Paper Size setting from within your application to ensure that it
Paper Size Paper Size
matches the size of the paper loaded.
Check Paper Size Paper Size on the Page Setup
Paper Size Paper Size
(Windows) or the Page Setup
the size of the paper loaded.
For the paper size compatible with Automatic Duplex Printing
"Automatically Printing on Both Sides of the Page" on the User's Guide .
On the Page Setup Page Setup tab, clear the Duplex Printing Page Setup Page Setup
again.
When using Mac OS 9.x, select Options
box, and then clear the Automatic
does not support the manual duplex printing.
Ensure that the POWER
If the POWER POWER POWER POWER lamp is off, turn the printer on.
The POWER POWER lamp will flash green when the printer is initializing. Wait until the
POWER POWER
POWER POWER lamp stops flashing. POWER POWER
When the POWER POWER lamp is flashing orange, an error may occur in the printer. For
POWER POWER
details on how to resolve the error, refer to "Handling Error Messages
72.
Ensure that the printer is securely connected to the computer.
Select iP6000D iP6000D on the Printer iP6000D iP6000D
If iP6000D iP6000D does not appear on the Printer
iP6000D iP6000D
Printer pop-
Printer Printer
following the procedures described in the Easy Setup Instructions .
The printer has a built-in waste ink absorber to hold the ink used during print
head cleaning. Eight flashes indicates that this absorber is nearly full.
Press the RESUME RESUME button to clear the error so you can continue printing. Before RESUME RESUME
the waste ink absorber becomes completely full, contact the Customer Care
Center.
Close the inner cover, then press the RESUME
Try This
My Computer My Computer My Computer and select Properties
Hardware Hardware tab and click Device Manager Hardware Device Manager Device Manager Device Manager. Double-click Universal
USB Printing Support.
USB Printing Support USB Printing Support
Universal Serial Bus controllers, and Canon PIXMA iP6000D
Universal Serial Bus controllers Universal Serial Bus controllers
General General tab shows any unusual condition. General
Page Setup tab in the Printer Properties
Page Setup Page Setup
Page Setup dialog box (Macintosh) to ensure that it matches Page Setup Page Setup
Automatic Duplex Printing Automatic Duplex Printing Automatic Duplex Printing, refer to
To print on both sides of the page manually, follow the procedure
below.
Duplex Printing Duplex Printing Duplex Printing check box. Then try printing
Options Options from the pop-up menu in the Print Options
Automatic check box. Then try printing again. Mac OS X
Automatic Automatic
POWER lamp lights green. POWER POWER
If using a switching hub or other device, disconnect the printer
and reconnect it directly to the computer and try printing again.
If successful, the problem may have been with the device.
There could also be a problem with the cable(s). Replace the
cable(s) and try printing again.
Printer pop-up menu on the Print Printer Printer
Printer pop-up menu, add the printer
Printer Printer
RESUME button.
RESUME RESUME
Troubleshooting
Properties Properties. Properties
Properties.
Properties Properties
Universal Universal
Device Manager Device Manager tab. Device Manager
Canon PIXMA iP6000D.
Canon PIXMA iP6000D Canon PIXMA iP6000D
Automatic Duplex Printing.
Automatic Duplex Printing Automatic Duplex Printing
Printer Properties dialog box
Printer Properties Printer Properties
Handling Error Messages Handling Error Messages" on page Handling Error Messages
Print dialog box. Print Print
My My My
Universal
Print dialog Print Print
75