Handling Error Messages - Canon PIXMA iP6000D Quick Start Manual

Troubleshooting

Handling Error Messages

When a printer error occurs, the POWER/ERROR lamp flashes. The number of flashes
indicates the type of error that has occurred. Count the flashes and take the appropriate
action to correct the error.
Number of
Possible Cause
Flashes
Two flashes Printer is out of
paper/Paper does
not feed
Three flashes Paper jam/Paper
output tray is
closed
Four flashes Empty ink tank
Five flashes Print head not
installed/Print head
not installed
correctly/Defective
print head
Six flashes Inner cover is open
Eight flashes Waste ink
absorber* almost
full
Nine flashes A specified period
of time has elapsed
without receiving a
response from the
digital camera/The
digital camera or
digital video
camcorder
connected is not
compatible with
this printer
* The waste ink absorber absorbs ink used during cleaning.
72
Reload paper in the sheet feeder or cassette and press the RESUME
Clear the jammed paper, reload paper in the printer, then press the RESUME
button. If the paper output tray is closed, open it.
See "Paper Jams Paper Jams" on page 69.
Paper Jams Paper Jams
Press the RESUME RESUME button to resume printing with an empty ink tank. Replace it RESUME RESUME
with a new ink tank immediately after the printing. It may damage the printer if you
continue printing with an empty ink tank.
See "Replacing an Ink Tank Replacing an Ink Tank" on page 37. Replacing an Ink Tank Replacing an Ink Tank
Install the print head. If the print head is already installed, remove the print head
and check the electrical contacts for foreign matter, then reinstall.
After reinstalling the print head, you may need to realign it.
If this error still remains, the print head may be damaged. Contact the Customer
Care Center.
Close the inner cover and press the RESUME
The printer has a built-in waste ink absorber for the ink used during print head
cleaning.
Eight flashes indicates that the waste ink absorber is nearly full.
Press the RESUME RESUME button to cancel the error so you can continue printing.
RESUME RESUME
Before the waste ink absorber becomes completely full, contact the Customer Care
Center.
Disconnect the camera cable, press the RESUME
If the error is still unresolved, there is a possibility that you are using a digital
camera or digital video camcorder that is not supported by this printer. Use a
digital cameras or digital video camcorder compatible with this printer.
Try This
RESUME button.
RESUME RESUME
RESUME button. RESUME RESUME
RESUME button and reconnect the cable. RESUME RESUME
RESUME
RESUME RESUME