Canon PIXMA iP6000D Quick Start Manual page 69

Problem Possible Cause
Cannot Print to Incorrect page size
End of Job is selected
There is not enough
free space on the
hard disk
The size of the print
data is too large
Use reduced Use reduced
Use reduced Use reduced
printing is not printing printing printing
selected when
performing
automatic duplex
printing
Ensure that the page size setting matches the size of the paper loaded in the
printer:
Check the Paper Size Paper Size setting from within your application to ensure that it
Paper Size Paper Size
matches the size of the paper loaded.
Check the Page Setup Page Setup tab in the Printer Properties
Page Setup Page Setup
driver (Windows) or the Page Setup
to ensure that it matches the size of the paper loaded.
Your operating system may be out of free disk space.
Check the available space on your computer's hard disk.
Check the size of the print data. For Windows XP and Windows 2000, if the size of
the data is too large, part of it may be lost. When the spool format is EMF, follow
the procedure below.
1. Open the Printer Properties Printer Properties dialog box.
Printer Properties Printer Properties
2. On the Main Main Main Main tab, click Print Options Print Options. Print Options Print Options
3. Select the Reduce spool data size Reduce spool data size check box, and click OK
Reduce spool data size Reduce spool data size
When Reduce spool data size Reduce spool data size is set, the print quality may be
Reduce spool data size Reduce spool data size
degraded.
In automatic duplex printing, the printable area at the top of the page is 0.08 in/2
mm narrower than the usual area, therefore the bottom edge may not be printed.
Select Use reduced printing Use reduced printing in the printer driver.
Use reduced printing Use reduced printing
Print layout may be altered with the Use reduced printing
1. Open the Printer Properties Printer Properties dialog box.
Printer Properties Printer Properties
2. Click Print Area Setup Print Area Setup Print Area Setup Print Area Setup in the Page Setup
1. In the Print Print dialog box, select Duplex Printing & Margin Print Print
2. Select Automatic Duplex Printing Automatic Duplex Printing, and select Use reduced printing
Automatic Duplex Printing Automatic Duplex Printing
Area. Area Area Area
Try This
Printer Properties dialog box of the printer
Printer Properties Printer Properties
Page Setup dialog box of the printer driver (Macintosh)
Page Setup Page Setup
Use reduced printing function.
Use reduced printing Use reduced printing
Page Setup Page Setup Page Setup tab and select Use reduced printing
Duplex Printing & Margin from the pop-up menu. Duplex Printing & Margin Duplex Printing & Margin
Use reduced printing in Print
Use reduced printing Use reduced printing
Troubleshooting
OK.
OK OK
Use reduced printing. Use reduced printing Use reduced printing
Print
Print Print
67