Canon PIXMA iP6000D Quick Start Manual page 75

Number of
Possible Cause
Flashes
Ten flashes Cannot print on
both sides of the
page
Eleven flashes Automatic print
head alignment
failed
POWER lamp flashes POWER
POWER POWER
alternately green and
orange
The size of paper may not be compatible with Automatic Duplex Printing. Pressing
the RESUME RESUME button will discharge the paper, and restart printing from the front
RESUME RESUME
side of the next paper. The reverse side will not be printed when an error occurs.
For detailed information on the paper compatible with Automatic Duplex Printing,
refer to "Automatically Printing on Both Sides of the Page" in the User's Guide .
Possible causes are as follows:
Letter-sized paper is not loaded on the sheet feeder.
Ink has run out or ink tanks are not installed correctly.
See "Ink tank is not seated properly/Ink tank is empty Ink tank is not seated properly/Ink tank is empty" on page 63. Ink tank is not seated properly/Ink tank is empty Ink tank is not seated properly/Ink tank is empty
Ink level is low
Print head nozzles are clogged.
Press the RESUME RESUME button. RESUME RESUME
See "Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern" on page 44 for information on how to
Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern
print a nozzle check pattern.
The paper output slot has been exposed to a strong light source preventing
correct print head alignment.
Press the RESUME RESUME button and move the printer to a darker location. Try to align RESUME RESUME
the print head again.
If the print head alignment fails again, manually align the print head. For a
detailed description of manual alignment, refer to "Aligning the Print Head" in the
User's Guide .
An error that requires contacting the Customer Care Center may have occurred.
Disconnect the printer cable from the printer, and then turn the printer off and
unplug the printer from the power supply. Plug the printer back in and turn the
printer back on after leaving it after a while.
If the problem remains, contact the Customer Care Center.
Troubleshooting
Try This
73