Canon PIXMA iP6000D Quick Start Manual page 52

Printing Maintenance
(3) When the confirmation message is displayed, click OK
Print head cleaning starts when the POWER
Important
(4) Read the message and click Print Check Pattern
pattern.
The nozzle check pattern is printed.
Note
4
Check the print head condition with the printed nozzle check condition.
See "Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern" on page 44. Printing the Nozzle Check Pattern Printing the Nozzle Check Pattern
.
Notes
50
Do not perform any other operations until the print head cleaning
finishes. This takes about 30 to 40 seconds.
Clicking Initial Check Items Initial Check Items displays the items to be checked before Initial Check Items Initial Check Items
cleaning.
The nozzle check pattern will not be printed correctly if there is not
enough ink. Replace the ink tank if the remaining amount of ink is
insufficient.
See "Replacing an Ink Tank Replacing an Ink Tank" on page 37.
Replacing an Ink Tank Replacing an Ink Tank
If the problem remains after performing the print head cleaning
three times, try the print head deep cleaning.
See "Print Head Deep Cleaning Print Head Deep Cleaning Print Head Deep Cleaning" on page 53. Print Head Deep Cleaning
POWER lamp starts blinking. POWER POWER
Print Check Pattern to print the nozzle check
Print Check Pattern Print Check Pattern
OK. OK OK