Resolving Ip Addressing Issues - IBM 5500 Operational, Installation, And Maintenance Manual

Express ip control unit
Hide thumbs Also See for 5500:
Table of Contents

Advertisement

Resolving IP Addressing Issues

The adapter was unable to establish communications
0x00000011
with the 5500 Control Unit.
A failure occurred while trying to use the requested IO
0x00000012
port range. Correct all resource conflicts and reboot
your computer.
A failure occurred while trying to use the requested
0x00000013
memory space. Correct all resource conflicts and
reboot your computer.
One or more errors were encountered during the
0x00000014
adapter memory test. Shutdown your computer, and
place the IBM 5250 Express Adapter Support Diskette
#2 into your computer's floppy diskette drive and
reboot to run the IBM 5250 diagnostic program.
The adapter is online but the 5500 Control Unit is not
0x00000015
responding or the cable is not securely attached. Please
recheck the cable connection and reboot your machine
to correct this problem. If this message reappears,
consult with your 5500 Control Unit administrator to
determine if the 5500 Control Unit is configured for
your workstation
The 5250 adapter that was detected is either not
0x00000016
supported or not responding correctly. See the readme
file (readme.doc) for a list of supported adapters.
Another computer is already using the Station Address
0x00000017
that you specified during installation. Your 5500
Control Unit administrator can provide you with an
available address. See the readme.doc file for
instructions on changing your adapter configuration.
The computer IP address does not match the IP
0x00000018
Address assigned to you by the 5500 Control Unit.
Please RESTART your Client. If the problem persists,
contact your 5500 Control Unit system administrator
and refer to Resolving IP Address Issues in the
readme.doc file.
If Dynamic Host Configuration Protocol (DHCP) services are not available
on your network or if you manually configured the IP Address during
installation of the IBM 5250 Express TCP/IP Driver, verify that your
computer is using the correct IP address. See your 5500 administrator for your
Appendix D: Using the IBM 5250 Express TCP/IP Driver
Appendix D
177

Advertisement

Table of Contents
loading

This manual is also suitable for:

5500-01e5500-02e5500-01t5500-02t

Table of Contents