Page 1
8250 Management Modules SA33-0233-04 Command Quick Reference Guide This guide provides a quick reference to commands and options when you are operating the following 8250 Management Modules: Ethernet Management Module (EMM) Token Ring Management Module (TRMM) FDDI Management Module (FMM)
Page 2
Command is only available through Maintenance Mode. Command is only available using Advanced EMM software (that is, not available using Basic EMM, or other 8250 management modules). Command is only available using Advanced TRMM software (that is, not available using Basic TRMM, or other 8250 management modules).
Page 3
Page 3 Monday, April 1, 1996 2:31 PM 8250 Management Module Commands In the command table: Select commands from the left column, then select parameters from the right columns. User-selectable command variables appear in italic. Command Parameters BOOT BOOTP...
sa233.fr5 Page 15 Monday, April 1, 1996 2:31 PM Command Parameters port slot.port broadcast_frames THRESHOLD 3 station mac address errors index frames number multicast_frames (continued) octets value value SET TRUNK ring_in.trunk cable_monitor disable, enable slot ring_out.trunk ring_in.1 compatibility_mode disable, enable ring_out.1 ring_in.2 external_beacon_recovery...
Page 17
sa233.fr5 Page 17 Monday, April 1, 1996 2:31 PM Command Parameters SHOW network_paths (continued) ethernet fddi token_ring port slot.all no_verbose slot.port verbose rmon alarm control index event host matrix ringstation topn_hosts distribution promiscuous data index host data control_index by_creation_order by_mac_address mac_address mac address log data...
Page 19
sa233.fr5 Page 19 Monday, April 1, 1996 2:31 PM Command Parameters SMT_GET access mac_timers path_timers user_data SMT_SET access permissive restrictive mac_tmax number (10.4860 to 1342.1777 milliseconds) mac_tmin number (0 to 5.24288 milliseconds) mac_treq number (0 to 1342.1777 milliseconds) path_tvx number (0.02048 to 5.24288 milliseconds) user_data data TELNET...