Maintenance Procedures For Direct Printing - Canon BJC-S820D Quick Start Manual

Printing Without a Computer

Maintenance Procedures for Direct Printing

Printing a Nozzle Check Pattern
You can print a nozzle check pattern by pressing the RESET button of the printer.
Follow the steps below.
1.
Make sure the printer is on.
2.
Load letter paper.
3.
Keep the RESET button pressed down, and release it when the power lamp
blinks twice.
To print a nozzle check pattern:
1.
Make sure the printer is on.
2.
Load letter paper.
3.
Press the Maintenance button. The
icon appears in Required Sheets.
4.
Press the
5.
Press the Print button. Nozzle check pattern is
printed. When printing ends, the
icon appears.
6.
Press the Maintenance button to exit.
7.
Compare the nozzle check patterns.
•
If the lines in the first pattern are broken,
the printhead must be cleaned. See
"Cleaning the Printhead" on page 41.
•
If the vertical lines in the second pattern
stand out, the printhead position must be
aligned. See "Aligning the Printhead" on
page 49.
40
(right) button once. The
icon appears.