Canon BJC-S820D Quick Start Manual page 44

To set the media type:
1.
Press the Mode button to select the desired print mode.
2.
Move the
the (top) or
3.
Select the media type by pressing the
or (right) button.
You can check the media name that corresponds to
each letter on the right side of the Operation Panel.
Setting the Print Layout
You can set the number of photos (layout) to be printed on one sheet of paper.
To set the print layout:
1.
Press the Mode button to select the desired print mode.
2.
Move the
(top) or
3.
Select the layout by pressing the
or (right) key.
Select to print a borderless photo.
Select to print a bordered photo.
(cursor) to Media Type by pressing
(bottom) button.
•
In Index mode, Layout cannot
be set.
•
In Single Frame mode, the same
photo is lined up in the specified
layout and printed.
•
In All Frames, Specified Frame,
and DPOF mode, the sections
that have no photo to print are
left blank.
(cursor) to Layout by pressing the
(bottom) key.
Printing Without a Computer
(left)
(left)
37