Xerox FreeFlow Server Carrier Procedures Manual page 13

For color 560/570 printer

Hide thumbs Also See for FreeFlow Server:

Installation

Xerox FreeFlow Print Server for Color 560/570 Print Server

2.2.20 Remove the monitor settings paper from the front of the

monitor glass.

2.2.21 ①Set the monitor upright on its base and place on the DFE

stand. If the Customer does not have a DFE stand, place on a flat

work surface. Then, confirm that

the power cord, ③the VGA

②

monitor cable, and

the USB data cable are properly seated in the

④

back of the monitor.

2.2.22

Open the larger flat box from the FreeFlow Print Server

①

box and ②remove the power cable.

2.2.23 Plug the power cable into the back of the Xerox Free-Flow

Print Server.

Carrier Procedure Manual

2-7

Table of Contents