Protective Mechanisms Against Manipulation; Technical Support - Siemens SENTRON PAC1020 Manual

Introduction

1.6 Protective mechanisms against manipulation

copy of this source code can be obtained by anyone in receipt of this information during the
period required by the applicable OSS licenses by contacting the following address:
Siemens AG
Smart Infrastructure
Electrical Products

Technical Support

Postfach 10 09 53
93009 Regensburg
Germany
You will find Technical Support under (https://support.industry.siemens.com/cs/us/en/ps).
Keyword: Open Source Request (please specify Product name and version, if applicable)
SIEMENS may charge a handling fee of up to 5 EUR to fulfil the request.
Warranty regarding further use of the Open Source Software
SIEMENS' warranty obligations are set forth in your agreement with SIEMENS. SIEMENS does
not provide any warranty or technical support for this Product or any OSS components
contained in it if they are modified or used in any manner not specified by SIEMENS. The
license conditions may contain disclaimers that apply between you and the respective
licensor. For the avoidance of doubt, SIEMENS does not make any warranty commitment on
behalf of or binding upon any third-party licensor. The Open Source Software used in the
product and the license agreements concerning this software can be found in the
Readme_OSS.
1.6 Protective mechanisms against manipulation
Note
Risk of manipulation
In order to reduce the risk of manipulation occurring on the device, it is recommended that
the protective mechanisms available in the device are activated:
• Password protection to protect the device against unintentional adjustment of
parameters.
For further information, please refer to chapter Parameterizing via the operator interface
(Page 50).
1.7 Technical Support
You can find further support on the Internet at:
Technical Support (https://www.siemens.com/lowvoltage/technical-support)
10
Equipment Manual, 05/2020, L1V30610008B-01
PAC1020