Cleaning The Printer - Canon Color Bubble Jet BJC-2000 Series User Manual

Do not place the printer too close to a fluorescent lamp. Allow at
least six inches (15 cm) clearance between the printer and any
fluorescent lamp. Fluorescent lamps generate electrical noise that
may cause printer malfunctions.

Cleaning the Printer

Your printer requires little routine maintenance. Perform the following
maintenance, as necessary, to keep your printer in good operating
condition.
C
Do not clean the exterior of the printer with volatile liquids such as
thinners, benzine, or any spray-type or chemical cleaners; doing so
will damage the surface of the printer.
When cleaning the printer, avoid the area near the print head on the
BJ cartridge. Do not touch the print head. Ink may leak out and
cause stains.
Unplug the
printer.
Chapter 4
To avoid personal injury, always unplug the printer before
cleaning it.
Maintaining the Printer 4-3