Videoscope; Introduction; Connections & Operations - Launch X-431 EURO TURBO User Manual

10.1 Introduction

Automotive videoscope is mainly applied to those unseen parts of engine, fuel
tank, braking system.
While testing a vehicle system, engine is one of the main parts to be checked.
To check if the internal of an engine is qualified or not or whether internal carbon
deposit and damage exists in the engine or not, we can make full use of a
videoscope to solve these questions.
This tool provides an optional function of videoscope (needs to be purchased
separately).
The videoscope is mainly composed of an inspection camera, flexible tube and
data cable. The water-resistant camera lens with adjustable LED lights enables
you to observe the parts that cannot be seen in wet, dark, fluid soaked places.
The included flexible tube is convenient for easy inspection and allows for
access to hard-to-reach areas.
In addition, the captured pictures and videos also provide you intuitive data for
easy analysis.
10.2 Connections & Operations
1. Insert the data cable of the
of the tablet.
2. Bend the neck of the flexible tube as desired and extend the camera with
adjustable LED lights to some unseen or unreachable parts of engine,
hydraulic system, nozzles etc.
3. After connections are properly made and turn the tablet on. Go to "More" ->
"Videoscope" to run it, then the screen will display the scene captured from
the videoscope camera.
5. Adjust it until the lens stops in the desired place and then use the dial for LED
light brightness to adjust the brightness.
6. Press the Snapshot button on the videoscope to take a photo. Alternatively,
you can also press the Snapshot button on the tablet to take photos.
www.diagtools.eu, Pernavas 43A, Riga, Latvia, LV-1009, +37129416069, info@diagtools.eu
X-431 EURO TURBO User Manual

10 Videoscope

videoscope into the charging/data I/O port of port
58