Download
Share
Print this page
  1. Manuals
  2. Brands
  3. Trynex Manuals
  4. Spreader
  5. SnowEx V-MAXX SP-2400 H
  6. Owner's/operator's manual

Trynex SnowEx V-MAXX SP-2400 H Owner's/Operator's Manual

Equipment for snow & ice control
Hide thumbs

Advertisement

Quick Links

Download this manual
This Manual Must Be Read Before Operating The Equipment
Owner / Operator's Manual
Madison Heights, Michigan 48071
800-725-8377
© Trynex International 2008
(REV000)
Equipment for Snow & Ice Control
L1215
V-MAXX SPREADERS
Protected by the following patents, #6,089,478, #6,088,865, #Des.425,915
and other pending U.S. and foreign patent applications.
SP-2400 H
SP-8500 H
SP-9500 H
CUSTOMER COPY
MAXXH — 1

Advertisement

loading
Need help?

Need help?

Do you have a question about the SnowEx V-MAXX SP-2400 H and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Trynex SnowEx V-MAXX SP-2400 H

Summary of Contents for Trynex SnowEx V-MAXX SP-2400 H

  • Page 1 V-MAXX SPREADERS SP-2400 H SP-8500 H SP-9500 H CUSTOMER COPY Madison Heights, Michigan 48071 Protected by the following patents, #6,089,478, #6,088,865, #Des.425,915 and other pending U.S. and foreign patent applications. 800-725-8377 © Trynex International 2008 L1215 MAXXH — 1 (REV000)

  • Page 2: Table Of Contents

    Warranty ....................54 - 55 Have a question or need assistance? SnowEx Customer Service (800) 725-8377 or (248) 586-3500 Monday through Friday 8:00 AM to 4:30 PM EST Fax: (248) 691-8378 E-Mail: customercare@trynexfactory.com Website: www.snowexproducts.com MAXXH — 2 © Trynex International 2008 L1215...

  • Page 3: Introduction

    (ORANGE) Information that, if not carefully followed, can cause serious personal injury or death! (YELLOW) Information that, if not carefully followed, can cause minor injury or damage to equipment. © Trynex International 2008 L1215 MAXXH — 3...
  • Page 4 The spreader you have purchased is an example of snow and ice control technology at its nest! Your spreader’s innovative, self-contained design is a trademark of all Trynex products. Here’s why... SIMPLICITY: Fewer moving parts manufactured of higher quality means minimal maintenance for your SnowEx spreader.
  • Page 5 For your safety warning and information decals have been placed on this product to remind the operator of safety precautions. If anything happens to mark or destroy the decals, please request new ones from Trynex, International. Unit must be strapped down and locked into position before operating vehicle.

  • Page 6: Safety Information

    Always disconnect the spreader hydraulic hoses from there power source before servicing the unit. Failure to do so could result in serious injury. Make sure hydraulic couplers are fully connected, failure to do so will result in motor failure. MAXXH — 6 © Trynex International 2008 L1215...
  • Page 7 V-Maxx ON REVERSE SIDE series spreaders. Some locations will be di erent on the SP-2400 tailgate spreader. D 6546 D 6859 D 6545 D 6544 D 6335 D 6548 © Trynex International 2008 L1215 MAXXH — 7...
  • Page 8 V-Maxx 8500H/9500H Auger Drive Assembly Parts Breakdown MAXXH — 8 © Trynex International 2008 L1215...
  • Page 9 - " " 4 D 6132 Hose Fitting Mounting Bracket D 5759 6897 SP-9500 80” Auger Weldment SP-9500 96” Hydraulic Hose D 5779 SP-9500 Rear Rail Assembly D 6881 © Trynex International 2008 L1215 MAXXH — 9...
  • Page 10 V-Maxx 2400H Auger Drive Assembly Parts Breakdown NOTE: Hoses are shown for reference only and are not included with the system. MAXXH — 10 © Trynex International 2008 L1215...
  • Page 11 D 5775 Motor Coupler D 5776 Urethane Spyder D 5749 1/4” Key Stock D 6825 Woodru Key D 5754 Auger Motor Mounting Bracket Hydraulic Auger Motor 5760 D 5767 Hydraulic Hose Coupler © Trynex International 2008 L1215 MAXXH — 11...
  • Page 12 V-Maxx 8500H Spinner Drive Assembly Parts Breakdown NOTE: Hoses are shown for reference only and are not included with the system. L1215 © Trynex International 2008 MAXXH — 12...
  • Page 13 D 6165 5/16 Flat Washer D 6132 1/4-20 x 1/2” SS HWH Serrated TCS D 6832 a i r D 6563 20” Drive Mounting Pin D 4135 Drive Mounting Pin Clip © Trynex International 2008 L1215 MAXXH — 13...
  • Page 14 V-Maxx 9500H Spinner Drive Assembly Parts Breakdown NOTE: Hoses are shown for reference only and are not included with the system. L1215 © Trynex International 2008 MAXXH — 14...
  • Page 15 D 6885 a i r 10” Drop Extension D 5777 20” Drive Mounting Pin D 6563 D 4135 Drive Pin Mounting Clip D 6463 Plastic Push Pin D 6859 Drive Extension Spinner Shield © Trynex International 2008 L1215 MAXXH — 15...
  • Page 16 V-Maxx 2400H Spinner Drive Assembly Parts Breakdown NOTE: Hoses are shown for reference only and are not included with the system. L1215 © Trynex International 2008 MAXXH — 16...
  • Page 17 Hydraulic Spinner Motor D 4124 3/8-16 Nylock Nut D 4125 3/8 Flat Washer D 4289 1/4-20 Nylock Nut Hydraulic Hose Coupling D 5767 D 6452 3/8-16 x 1” Serrated Hex Head Bolt © Trynex International 2008 L1215 MAXXH — 17...
  • Page 18 V-Maxx 8500H Hopper Assembly Parts Breakdown MAXXH — 18 © Trynex International 2008 L1215...
  • Page 19 Front Top Screen 6849 Rear Top Screen " 5 f l e l i r r e l 6866 Top Screen Hinge Pin D 4134 Top Screen Hinge Pin Clip MAXXH — 19 © Trynex International 2008 L1215...
  • Page 20 V-Maxx 9500H Hopper Assembly Parts Breakdown MAXXH — 20 © Trynex International 2008 L1215...
  • Page 21 3/8”-16 x 1” Hex Bolt Salt Discharge Ba e D 6869 D 6811 Inverted-V Backing Plates 3/8”-16 Nylock Nut D 4124 Heavy Duty Vibrator D 6899 D 6860 Vibrator Backing Plate Hopper Assembly MAXXH — 21 © Trynex International 2008 L1215...
  • Page 22 V-Maxx 2400H Hopper Assembly Parts Breakdown MAXXH — 22 © Trynex International 2008 L1215...
  • Page 23 Long Ba e Plate D 5714 D 5712 Interior Main Ba e Support Frame 5/16 x 1/2” HHCS SS D 6133 5/16 Flat Washer D 6165 5/16-18 x 1” HHCS SS D 4121 Hopper Assembly MAXXH — 23 © Trynex International 2008 L1215...
  • Page 24 V-Maxx 8500H Frame Assembly Parts Breakdown L1215 © Trynex International 2008 MAXXH — 24...
  • Page 25 V-Maxx 8500H Frame Assembly Parts Breakdown . y t - " " 1 t l o l i a " 8 " 1 t l o t f e © Trynex International 2008 L1215 MAXXH — 25...
  • Page 26 V-Maxx 9500H Frame Assembly Parts Breakdown L1215 © Trynex International 2008 MAXXH — 26...
  • Page 27 9500 Frame Weldment D 6882 Upper/Lower Front Rail Auger Motor/Transmission Support D 6884 D 6880 Rear Apron With Light Hole Knock Outs D 6528 1/2”-13 x 1” Serrated Hex Head Bolt Frame Assembly © Trynex International 2008 L1215 MAXXH — 27...
  • Page 28 V-Maxx 2400H Frame Assembly Parts Breakdown L1215 © Trynex International 2008 MAXXH — 28...
  • Page 29 Upper Pin Bracket 1.125 & 1.0 2 ea. D 4122 3/8-16 x 1-1/2 HHCS D 5730/31/32 Lower Pin 1.25, 1.0, .750 2 ea. D 5735 Right Hand Main Bracket Left Hand Main Bracket D 5734 Frame Assembly © Trynex International 2008 L1215 MAXXH — 29...
  • Page 30 Step 7: Push the ON/OFF button on the controller to check for power, when that has been con rmed turn power OFF. The electrical portion of the installation is complete. MAXXH — 30 © Trynex International 2008 L1215...
  • Page 31 CONNECT TO BACK OF CONTROL Description . y t Spreader Control D 5774 Control Power Harness D 5772 D 5771 Vehicle Harness Spreader Harness D 5773 Vehicle Harness Dust Cap D 6343 Work Light D 6786 © Trynex International 2008 L1215 MAXXH — 31...
  • Page 32 CONNECT TO BACK OF CONTROL Description . y t Control D 5774 Control Power Harness D 5772 Vehicle Harness D 5771 Spreader Harness D 5780 Vehicle Harness Dust Cap D 6343 Work Light D 6786 MAXXH — 32 © Trynex International 2008 L1215...
  • Page 33 CONNECT TO BACK OF CONTROL Description . y t Control D 5774 Control Power Harness D 5772 D 5771 Vehicle Harness Spreader Harness D 5781 Vehicle Harness Dust Cap D 6343 Work Light D 6786 © Trynex International 2008 L1215 MAXXH — 33...
  • Page 34 Red Positive (+) Black Negative (–) VIBRATOR CHMSL Black Negative (–) Black Negative (–) CHMSL VIBRATOR Red Positive (+) Red Positive (+) MAIN POWER PLUG SPREADER Positive (+) Black Negative (–) VIBRATOR POWER PLUG MAXXH — 34 © Trynex International 2008 L1159...
  • Page 35 Black Negative (–) (housing) Black Negative (–) Black Negative (–) Red Positive (+) CHMSL VIBRATOR OUTPUT Red Positive (+) (housing) Black Negative (–) Red Positive (+) * NOTE: Reference Bumper Plug for Color Code © Trynex International 2008 L1215 MAXXH — 35...
  • Page 36 (installed on Spreader from factory) Part No. Description Qty. D 6158 #10 Lock Nut D 6514 CHMSL Spreader Harness D 6529 #10 Black Oxide Screw CONNECT TO SPREADER LIGHT HARNESS 2-CONDUCTOR PLUG MAXXH — 36 © Trynex International 2008 L1215...
  • Page 37 Hose Routing Auger SP-8500H/9500H Hose Routing Spinner SP-8500H/9500H (hoses not included with spinner assy) © Trynex International 2008 L1215 MAXXH — 37...
  • Page 38 Hose Routing Auger SP-2400H Hose Routing Spinner SP-2400H (hoses not included with spinner assy) MAXXH — 38 © Trynex International 2008 L1215...
  • Page 39 D 4119 1/2" Flat Washer " 2 D 4121 3/8 - 16 x 1" Hex Bolt " 8 D 6536 Adj. Stop Bracket RT D 6537 Adj. Stop Bracket LT © Trynex International 2008 L1215 MAXXH — 39...
  • Page 40 D 6759 D 6760 Right Front Stop Bracket " 2 D 4116 1/2”-13 x1-1/2” Hex Bolt Flat Washer CROSS FRONT STRAPS D 4121 3/8”-16 x 1” Lock Nut AS SHOWN " 8 MAXXH — 40 © Trynex International 2008 L1215...
  • Page 41 Step 9: Connect the spreader power cord to vehicle main power plug mounted at rear of vehicle (see Electrical Installation). Step 10: Connect Center High Mount Stop Lamp (CHMSL) cord from the spreader to mating half attached to vehicle (see Electrical Installation). © Trynex International 2008 L1215 MAXXH — 41...
  • Page 42 V-Maxx 9500H Mounting Instructions (Continued) Recommended Installation For Platform Bodies Through Floor Chain Tie Downs (6) Places Weld On Stake Pockets (6) Places. L1215 © Trynex International 2008 MAXXH — 42...
  • Page 43 Step 3: Connect D-5740 short leveling rod to drive leveling bracket with hair pin clip. Align both rods next to each other (see g2) and weld togther. Dump Body Hinge (step 2) 4 “ g. 1 g. 2 MAXXH — 43 © Trynex International 2008 L1215...
  • Page 44 D 5731 Lower Weld On Pin 1.0 Dia D 5732 Lower Weld On Pin .750 Dia D 5734 Left Hand Main Bracket D 5735 Right Hand Main Bracket D 5736 Upper Gussett MAXXH — 44 © Trynex International 2008 L1215...
  • Page 45 • Speed of auger and spinner may be adjusted separately to get desired ow and spread distance from spreader. • The Vibrator Switch is needed for dense material or to increase the ow to the auger. This eliminates bridging of material in hopper. © Trynex International 2008 L1215 MAXXH — 45...
  • Page 46 • If you are using a sand/salt mixture, remove ba e extension. Part No. Description Qty. D 6847 Salt Ba e Extension D 6807 Discharge Ba e D 6874 #14 x 1-1/2" TEK w/Neo Washer MAXXH — 46 © Trynex International 2008 L1215...
  • Page 47 • WARNING: Always disconnect power source before attempting to remove material ba e. Long Ba e Connect To Link Arm Short Ba e © Trynex International 2008 L1215 MAXXH — 47...
  • Page 48 Wet material. Replace with dry material. Frozen or coarse material. Replace material. Spinner not turning. Check drive assembly. Auger coupling disengaged Realign and tighten all set screws. Vibrator not working. Check electrical connections. MAXXH — 48 © Trynex International 2008 L1215...
  • Page 49 REMOVE MATERIAL ISSUE DOES NOT FLOW OBSTRUCTION OBSTRUCTION SWITCH HOSES AUGER RUNS AUGER RUNS AROUND BACKWARDS PROPER DIRECTION TURN ON VIBRATOR SLOW TURN ON MATERIAL VIBRATOR FLOW INCREASE AUGER SPEED MATERIAL ISSUE © Trynex International 2008 L1215 MAXXH — 49...

  • Page 50: Spreader Maintenance

    Apply small amount of light oil to latches as needed. • Grease bearings after every 20 hours use. • After rst use, tighten all nuts and bolts on spreader and mount. • WARNING: Never remove spreader with material in hopper. MAXXH — 50 © Trynex International 2008 L1215...
  • Page 51 3/4-10 7/8-9 Metric Grade 8.8 (ft.-lb.) SIZE TORQUE SIZE TORQUE M 12 M 14 M 10 M 16 These torque values apply to mount assembly fasteners except those noted in the instruction. © Trynex International 2008 L1215 MAXXH — 51...
  • Page 52 Auger Motor Size___________________________ 165 cc Per Revolution Spinner Motor Size__________________________ 45cc per revolution Recommended Oil__________________________ Hydraulic SAE 10 Non-Foaming Recommended Filter________________________ Hydraulic 25 Micron Rating Frequency of Service________________________ Initial 50 Hours of Service/250 Hours Thereafter/Min Once Per Season © Trynex International 2008 L1215 MAXXH — 52...

  • Page 53: Blank

    THIS PAGE INTENTIONALY LEFT BLANK © Trynex International 2008 L1215 MAXXH — 53...

  • Page 54: Warranty

    Neither Trynex, nor any company a liated with it, makes any warranties, representations for promise as to the performance or quality other that what is herein contained. The liability of Trynex to the purchaser for damages arising out of the manufacture, sale, delivery, use or resale of this spreader shall be limited to and shall not exceed the costs of repair or replacement of defective parts.
  • Page 55 SnowEx Dealer Address: SnowEx Dealer Phone: Does your Trynex Dealer stock Trynex replacement Parts? I don’t know Do you feel your Trynex Dealer sold you the correct product for your needs/application? 10) How would you rate your overall satisfaction Very...
  • Page 56 W arm Up to with a F R E E F R E E Winter Hat! Simply Fill Out Your Warranty Registration and Return It to the Factory! From: Postage Required Post O ce will not deliver without proper postage. 531 Ajax Drive Madison Heights, MI 48071...

This manual is also suitable for:

Snowex v-maxx sp-9500 hSnowex v-maxx sp-8500 h