Scanning From An Application Software - Canon PIXMA MP460 User Manual

3
Use [ ] or [ ] to select the scan operation, then press [OK].
4
Press [Color] or [Black].
The document is scanned. The settings configured from MP Navigator apply when scanning.
Important
Note

Scanning from an application software

You can scan an image from a TWAIN- or WIA- (Windows XP only) compliant application
software and use the image in that application software. This procedure varies depending on the
application software.
For the detailed procedure, refer to the manual of the application software you are using.
60
Scanning Images
If with some types of original the position and size of the image is not
scanned in correctly, please refer to "Selecting the Behavior of the
Operation Panel with MP Navigator" in the Scanning Guide (On-screen
Manual) and change the MP Navigator [Document Type] and [Document
Size] to match those of the original being scanned.
The subsequent procedure varies depending on your settings. For
details, see the Scanning Guide.
Chapter 6