Canon PIXMA MP460 User Manual page 130

Canon pixma mp460: users guide
Hide thumbs Also See for PIXMA MP460:
Table of Contents

Advertisement

Use a computer on which Windows XP, Windows
2000, Windows Me or Windows 98 can operate.
(Pentium®, Celeron® 566MHz / 128MB RAM: 256MB
recommended)
USB 2.0 Hi-Speed interface
*1
USB 2.0 Hi-Speed
operation can only be
guaranteed under the environments below.
OS: Windows XP (SP1 or later)/Windows 2000 (SP4
or later)
USB 2.0 Hi-Speed driver: USB 2.0 driver for
*2
Windows
USB 2.0 Hi-Speed interface: a PC and a USB cable
that comply with USB 2.0 Hi-Speed standard
*1
Since the USB 2.0 Hi-Speed interface is fully
upwardly compatible with USB Full-Speed (USB 1.1),
it can be used at USB Full-Speed (USB 1.1).
*2
Microsoft's authorized drivers are available
through Windows Update or Service Pack
installation. Any non-Microsoft USB 2.0 drivers are
not guaranteed.
*3
All operations are not guaranteed for computers
standard-equipped with a USB 2.0 Hi-Speed
interface.
USB interface
USB operation can only be guaranteed on a PC with
preinstalled Windows XP, Windows 2000, Windows
Me, or Windows 98 or a PC preinstalled with
Windows 98 or later and upgraded to Windows XP,
Windows 2000, or Windows Me.
The CD-ROM drive, or the CD-ROM drive that is
shared online.
Available hard-disk space for printer driver
installation.
Windows XP/Windows 2000/Windows Me/Windows
98: Approx. 550 MB
Canon IJ Status Monitor cannot be used under the
following conditions:
– When sharing this machine on a network (Windows
Me, Windows 98)
Additional Systems Requirements for On-screen Manuals
Browser: Windows HTML Help Viewer
Note
Microsoft Internet Explorer 5.0 or later must be
installed.
The on-screen manuals may not be displayed properly
depending on your operating system or Internet
Explorer version. We recommend that you keep your
system up to date with Windows Update.
128
Appendix
Systems Requirements
Use a Macintosh series computer equipped with
USB interface on which Mac OS X v.10.2.8 or later
can operate.
USB 2.0 Hi-Speed interface
USB 2.0 Hi-Speed
under the environments below.
OS: Mac OS X v.10.2.8 or later
An internal USB 2.0 Hi-Speed port and a USB cable
that comply with the USB 2.0 Hi-Speed standard
(USB 2.0 Hi-Speed operation on the expansion board
is not guaranteed.)
* Since the USB 2.0 Hi-Speed interface is fully
*3
upwardly compatible with USB Full-Speed (USB 1.1),
it can be used at USB Full-Speed (USB 1.1).
USB interface
CD-ROM drive
Available hard-disk space for printer driver
installation.
Mac OS X v.10.2.8 or later: Approx. 450 MB
The following functions are not supported:
– Duplex Printing
– Photo Optimizer PRO
– Poster Printing
– Fit-to-Page Printing
– Booklet Printing
– Reverse Order Printing (supported with Mac OS X
v.10.3.x or later)
Browser: Help Viewer
Note
The on-screen manuals may not be displayed properly
depending on your operating system. We recommend
that you keep your system up to date.
*
operation can only be guaranteed
Chapter 12

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

1449b002

Table of Contents