4
Start Bottom Plate Cleaning.
(1) Display the Maintenance screen.
(2) Use [ ] or [ ] to select <Bottom plate cleaning>, then press [OK].
(3) When the confirmation message is displayed, select <Yes> and press [OK].
The paper is ejected.
Inspect the discharged paper. If dust or dirt can be seen on the paper, repeat the cleaning
process.
Note
Cleaning The Protrusions Inside The Machine
If the protrusions inside the machine are stained, wipe ink off the protrusions using a swab or
something similar.
Important
Caution
96
Routine Maintenance
If the discharged paper still appears dirty after you have run this Cleaning
process, the inside of your machine is probably extremely dirty.
Clean the inside of the machine in accordance with the following
directions.
See "Cleaning The Protrusions Inside The Machine" on page 96.
Before cleaning, be sure to turn OFF the machine.
Do not touch the transparent film (A), film cable (B), ink absorber (sponge
part) (C), or any metal parts.
(A)
(B) (C)
Chapter 10