Adjusting The Tone Of A Color Or Grayscale Image In Advanced Mode - Canon MultiPASS F20 Software User's Manual

6. If you want to clear the current selection, click outside the crop
border.
7. To preview the cropped image, click Preview.
Scaling the Image Output Size
You can scale the size of your preview image, to maintain the image size
while enlarging or reducing the output size. For example, if you scale
your image by 50%, the output size of the image is half the size of the
actual image size.
To set an image scale:
On the Main tab, in the Scale box, enter a percentage.
Adjusting the Tone of a Color or Grayscale Image in
Advanced Mode
If you selected Color or Grayscale as your color mode, you can produce a
wide range of visual effects or corrections in your preview image by
adjusting the settings on the Tone tab. The tone settings can be adjusted
using the following methods.
To automatically correct the tone:
Click Auto on the ScanGear toolbar or the Tone tab.
To adjust the contrast or brightness of an image:
1. On the Tone tab, click Contrast/Brightness.
Chapter 4
6
Scanning 72