Removing The Multipass Suite - Canon MultiPASS F20 Software User's Manual

Removing the MultiPASS Suite

If you are planning on reinstalling the MultiPASS Suite, you must first
remove the current installation of the software.
If you are using Windows 2000/XP, you must log on as a member of the
Administrator group to remove the MultiPASS Suite software.
When you remove the MultiPASS Suite, all the software components
(such as the printer driver) are automatically removed.
To remove the MultiPASS Suite:
1. Close the MultiPASS Suite and all of its components, including the
Toolbar and Status Monitor.
Be sure to close, and not just minimize, the Toolbar and Status
Monitor. To close the Toolbar, right-click the Toolbar icon on the
Windows taskbar, and then click Exit MultiPASS Toolbar on the
Toolbar menu. To close the Status Monitor, right-click the Status
Monitor icon on the Windows taskbar, and then click Close on the
Status Monitor menu. Then quit any applications (including virus
checkers) that are currently running.
2. On the Windows desktop, click Start, point to Settings, and then click
Control Panel (in Windows XP, click Start, and then click Control
Panel).
3. In Control Panel, double-click Add/Remove Programs (in Windows
XP, click Add or Remove Programs).
4. In the Add/Remove Programs Properties dialog box (in Windows
XP, the Add or Remove Programs Properties dialog box), click
MultiPASS Suite, and then click the Add/Remove button (Windows
98/Me) or the Change/Remove button (Windows 2000/XP).
5. Follow the on-screen instructions.
When prompted, click Remove to remove the MultiPASS Suite.
Chapter 6 Fine-tuning the MultiPASS Suite 115
6