Align The Print Head - Canon PIXMA MP640 series Getting Started Manual

C:-.-... - . }Iii==-:=J
Print Head Alignment takes about 5 minutes to
complete.
Wait until the pattern is printed, then go to the next
step.
Head
aIignmenl
requhd.
Load a
sheet of
supplied
papll (MP-l01) in tho
roar tray and press
m.
Confirm the message on the LCD and press the OK
button.
Extend the Output Tray Extension (C).
D
Load a sheet of supplied specialty paper (Matte
Photo
Paper MP-101) in the Rear Tray (A) by
referring to steps
0
to
\ID
in "Loading Paper"
on page 49.
o
Align the Print Head for better print results.
This takes about 5 minutes.
Use a sheet of supplied specialty paper (Matte
Photo Paper MP-101) for alignment.
~---------
• Be sure to use MP-101 for Automatic Print Head
Alignment.
• MP-101 cannot be fed from the Cassette Load it in
the Rear Tray
• MP-101 has front and back sides. Load it so that the
cut corner (B) is at the top right.
~----------
• For details on media sizes and types you can use, refer to
"Loading Paper" in the on-screen manual: Basic Guide.
Hardware Setup 11