Canon MultiPASS C530 Fax Manual page 132

What Happens When Fax/Tel Mode Is Selected
Type of call
Telephone charges
begin for the caller.
RING START TIME
(Factory default
setting = 8 sec.)
F/T RING TIME
(Factory default
setting =15 sec.)
Chapter 5
Telephone
Sending document
manually
The MultiPASS answers without ringing.
The MultiPASS listens for the fax tone.
(For 8 sec.)
The fax tone
The fax tone is not detected.
The MultiPASS starts ringing.
If you don't pick up the handset
(within 15 sec.).
DEFAULT ACTION
Choose between:
RECEIVE (factory default setting) and DISCONNECT.
RECEIVE
(Factory default setting)
Not all fax machines are capable of sending a fax
tone. For those cases if you set the DEFAULT
ACTION to RECEIVE, the MultiPASS switches to
receive mode automatically and starts receiving
the document. If no document comes in, it
disconnects after approximately 55 seconds.
Fax
Fax
Sending document
automatically
The document is
is detected.
received automatically .
(The fax tone is
detected and the
MultiPASS switches
to receive mode.)
Pick up the
handset to talk.
DISCONNECT
The MultiPASS
disconnects the call.
Receiving Faxes 5-9