Canon MultiPASS C530 Fax Manual page 109

n
If you enter the wrong destination, press
G
enter the correct destination.
You must dial the second number within five seconds of dialing the first number. All
G
subsequent numbers must be dialed within 10 seconds. If you wait longer than the time out
interval before dialing the next number, the unit will start scanning the document. You can
turn off the time-out interval using the Menu system (see
If you want to review the numbers you entered, press
G
through the numbers.
4. Press
Start / Scan
begin scanning automatically.
I
I
I
Chapter 4
to begin scanning for sending, or wait a few seconds for the MultiPASS to
Start/Scan
The MultiPASS then scans the document into memory, and begins sending it to the
destinations.
You will see a series of brief messages showing details on the transmission.
To cancel sending, press
Sending to all destinations you specified in step 3 will be canceled. (You cannot cancel
only one destination.)
, then
Function
. You will be asked to confirm canceling. Press
Stop
. Then press
Clear Function
page 7-13).
and use or
Function d u
Sending Faxes
again, and
to scroll
to cancel.
T
4-31