Blower Assembly - United States Stove US3200E Owner’s Instruction And Operation Manual

FOR CUSTOMER SERVICE CALL: 800-750-2723 EXT 5050

BLOWER ASSEMBLY

The blower assembly must be disconnected from
the source of electrical supply before attempting the
installation. The blower assembly is intended for use only
with a stove that is marked to indicate such use. Do not
route the supply cord near or across hot surfaces! Fix the
assembly to the back of the stove with the four screws
provided.
ASH PAN
The ash pan is located below the firebox.
© 2021 United States Stove Company
ASSEMBLY INSTRUCTIONS
PEDESTAL BASE ASSEMBLY
1. Assemble the pedestal base skirting. Attach two
corner pieces (A) to the center section (B) of skirting
and secure with four (4) truss head screws.
B
2. Attach the side skirting sections (C & D) to the corner
pieces and secure with four (4) truss head screws.
4
A
C
D