Vestil LM-Series Use And Maintenance Manual

01/11
LM-Series and LMS-Series Fork Truck Attachments
LM-HRT &
LM-HRNT
LMS-EBT &
LMS-EBNT
Receiving instructions:
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered during the inspection, immediately record a
complete description of the damage on the bill of lading. If the product is undamaged, discard the packaging.
NOTE:
The end-user is solely responsible for confirming that product design, installation, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.

Table of Contents

Signal words......................... 2
Safe use recommendations...... 2
Safety Recommendations......... 3
Loading & Use Instructions....... 23 - 25
Inspections & Maintenance....... 25 - 26
Labeling diagram.................... 27
Limited Warranty.................... 28
rev. 3/6/2017
V
ESTIL
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
www.vestilmfg.com
Use and Maintenance Manual
Table of Figures
Fig. 1: LM-1T & -1NT Exploded Parts Diagrams, Parts Lists, Center of Gravity............ 3 - 6
Fig. 2: LM-OBT & -OBNT Exploded Parts Diagrams, Parts Lists, Center of Gravity........ 7 - 10
Fig. 3: LM-HRT & -HRNT Exploded Parts Diagram, Parts Lists, Center of Gravity........ 11 - 14
Fig. 4: LM-EBT & -EBNT Exploded Parts Diagram, Parts Lists, Center of Gravity......... 15 - 18
Fig. 5: LMS-EBT-46 & -EBNT-46 Exploded Parts Diagram, Parts Lists, Centers..........
of Gravity............................................................................................. 19 - 22
Copyright 2017 Vestil Manufacturing Corp.
LM, MANUAL
M
ANUFACTURING
Fax: (260) 665-1339
e-mail: sales@vestil.com
C .
ORP
LM-OBT &
LM-OBNT
LM-1T &
LM-1NT
LM-EBT &
LM-EBNT