Advertisement
Quick Links
01/11
LM-Series and LMS-Series Fork Truck Attachments
LM-HRT &
LM-HRNT
LMS-EBT &
LMS-EBNT
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine whether it
sustained damage during transport. If damage is discovered, record a complete description of it on the bill of lading. If
the product is undamaged, discard the packaging.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance comply with
laws, regulations, codes, and mandatory standards applied where the product is used.
Technical Service & Replacement Parts
For answers to questions not addressed in these instructions and to order replacement parts, labels, and
accessories, call our Technical Service and Parts Department at (260) 665-7586. The department can also be
contacted online at http://www.vestilmfg.com/parts_info.htm.
Electronic copies of Instruction Manuals
Additional copies of this instruction manual may be downloaded from
Table of Contents
Signal
Words.................................
Safety
Instructions..........................
National
Standards..........................
Loading & Using the
Boom.... 23, 24,
Record of Satisfactory
Condition....................................
Load
Tests....................................
Inspections....................................
Maintenance.................................
Labeling
Diagram...........................
Limited
Warranty............................
rev. 6/11/2020
Instruction Manual
Table of Figures
2
Fig. 1: LM-1T & -1NT Exploded Views, Parts Lists, Centers of Gravity........... 3, 4, 5,
2
Fig. 2: LM-OBT & -OBNT Exploded Views, Parts Lists, Centers of Gravity...... 7, 8, 9,
2
Fig. 3: LM-HRT & -HRNT Exploded Views, Parts Lists, Centers of Gravity...... 11, 12, 13,
25
Fig. 4: LM-EBT & -EBNT Exploded Views, Parts Lists, Centers of Gravity....... 15, 16, 17,
Fig. 5: LMS-EBT-46 & -EBNT-46 Exploded Views, Parts Lists, Centers
25
of Gravity................................................................................. 19, 20, 21,
25
26
26
27
28
Table of Contents
https://www.vestil.com/page- manuals.php
Copyright 2020 Vestil Manufacturing Corp.
LM MANUAL
LM-OBT &
LM-OBNT
LM-1T &
LM-1NT
LM-EBT &
LM-EBNT
6
10
14
18
22
Advertisement
Related Manuals for Vestil LM-Series
Summary of Contents for Vestil LM-Series
- Page 1 01/11 rev. 6/11/2020 LM MANUAL LM-Series and LMS-Series Fork Truck Attachments Instruction Manual LM-OBT & LM-OBNT LM-HRT & LM-HRNT LM-1T & LM-1NT LM-EBT & LMS-EBT & LM-EBNT LMS-EBNT Receiving Instructions After delivery, remove the packaging from the product. Inspect the product closely to determine whether it sustained damage during transport.
- Page 2 SAFETY INSTRUCTIONS Vestil strives to identify foreseeable hazards associated with the use of its products. However, material handling is dangerous and no manual can address every conceivable risk. The end-user ultimately is responsible for exercising sound judgment at all times .
- Page 3 ” snap hook 99-145-019 ” 3.25-ton shackle 99-145-037 ” chain 36” long 99-145-084 Lap link ” -13UNC x 2” HHCS zinc- 11211 plated bolt 36110 ” – 13UNC zinc-plated hex nut Copyright 2016 Vestil Manufacturing Co. Page 3 of 28...
- Page 4 ” 38” 30” ” ” ” 688.5 lb. LM-1T-8-36 in. (135.3 cm) in. (87.5 cm) ” (34.6 cm) -149 ” ” 44” 36” ” ” ” 711.7 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 4 of 28...
- Page 5 99-145-019 ” 3.25-ton shackle 99-145-037 ” chain 36” long 99-145-084 Lap link in. – 13 UNC x 2in. HHCS 11211 zinc-plated bolt ” – 13UNC zinc-plated hex 36110 Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 5 of 28...
- Page 6 ” (29.8 cm) ” (29.8 cm) ” ” 38” 30” ” ” 506.9 lb. LM-1NT-8-36 ” (29.8 cm) ” (29.8 cm) ” ” 44” 36” ” ” 525.4 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 6 of 28...
- Page 7 ” i.d. red handle grip 99-145-019 2-ton hook and shackle 99-145-084 Lap link 11211 ” – 13UNC x 2” hex bolt 36110 ” – 13UNC zinc-plated hex nut Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 7 of 28...
- Page 8 ” 38” 30” ” ” ” 684.1 lb. LM-OBT-8-36 ” (131.3 cm) 35” (88.9 cm) ” (38.7 cm) ”-145 ” ” 44” 36” ” ” ” 703.3 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 8 of 28...
- Page 9 ” inner diameter red handle grip 13-025-023 99-145-019 ” 3 -ton shackle 99-145-084 Lap link 11211 ” – 13UNC x 2” hex bolt 36110 ” – 13 zinc-plated hex nut Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 9 of 28...
- Page 10 ” (33.5 cm) ” ” 38” 30” ” ” ” 510.0 lb. LM-1NT-8-36 ” (76.8 cm) 13 ” (33.5 cm) ” ” 44” 36” ” ” ” 521.2 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 10 of 28...
- Page 11 Swivel hook, 2-ton 08-145-002 Swivel hook, 3-ton 08-145-010 ” 2-ton shackle 08-145-041 ” snap hook 99-145-019 ” 3 -ton hook and shackle 99-145-037 ’ x 36” chain 99-145-084 Lap link Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 11 of 28...
- Page 12 13” 38” 30” ” ” ” 993.4 lb. LM-HRT-6-36 ” (33.3 cm) ” (26.4 cm) ” (91 cm) ”-94 ” 13” 44” 36” ” ” ” 1008.6 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 12 of 28...
- Page 13 99-145-037 ” chain 36” long 99-145-084 Lap Link Frame, boom + base weldment: 08-514-008 LM-HRNT-6-24 08-514-342 LM-HRNT-6-30 08-514-344 LM-HRNT-6-36 08-145-002 Swivel hook, 3-ton 99-145-019 ” 3 -ton shackle Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 13 of 28...
- Page 14 ” (68.9 cm) ” ” 38” 30” ” ” ” 931.8 lb. LM-HRNT-6-36 ” (22.4 cm) ” (68.9 cm) ” ” 44” 36” ” ” ” 947.0 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 14 of 28...
- Page 15 ” snap hook 99-145-084 Lap link 99-145-037 ” chain 36” long 99-145-019 ” 3 -ton shackle 08-145-002 Swivel hook, 3-ton 08-145-006 ” 6 -ton shackle 08-145-005 Swivel hook, 5-ton Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 15 of 28...
- Page 16 -149 ” ” 38” 30” ” ” 621.2 lb. LM-EBT-8-36 ” (145.1 cm) 38” (96.5 cm) ” (12.2 cm) -149 ” ” 44” 36” ” ” 635.8 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 16 of 28...
- Page 17 ” snap hook 99-145-084 Lap link 99-145-037 ” x 36” chain 99-145-019 ” 3 -ton shackle 08-145-002 Swivel hook, 3-ton 08-145-006 ” 6 -ton shackle 08-145-005 Swivel hook, 5-ton Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 17 of 28...
- Page 18 ” (82.1 cm) ” (10.3 cm) ” ” 38” 30” ” ” 444.3 lb. LM-EBNT-8-36 ” (82.1 cm) ” (10.3 cm) ” ” 44” 36” ” ” 458.9 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 18 of 28...
- Page 19 ” snap hook 99-145-084 Lap link 99-145-037 ” chain 36” long 99-145-019 ” 3 -ton shackle 08-145-002 Swivel hook, 3-ton 08-145-006 ” 6 -ton shackle 08-145-005 Swivel hook, 5-ton Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 19 of 28...
- Page 20 ” (9.5 cm) ” 13” 32” 24” ” ” 302.5 lb. LMS-EBT-46-8 ” (86.5 cm) ” (57.8 cm) ” (11.1 cm) ” ” 32” 24” ” ” 442.3 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 20 of 28...
- Page 21 99-145-084 Lap link 99-145-037 ” chain 36” long 99-645-019 ” 3 -ton hook and shackle 08-145-002 Swivel hook, 3-ton 08-145-006 ” 6 -ton shackle 08-145-005 Swivel hook, 5-ton Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 21 of 28...
- Page 22 ” (49.5 cm) ” (8.3 cm) ” ” 32” 24” ” ” 239 lb. LMS-EBNT-40-8 ” (52.4 cm) ” (9.2 cm) ” ” 32” 24” ” ” 329 lb. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 22 of 28...
- Page 23 Tighten the locking bolt by turning it clockwise. Turn locking bolt counterclockwise to loosen Boom extension adjustment handle Boom sleeve Turn locking bolt clockwise to tighten against boom Boom Boom sleeve Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 23 of 28...
- Page 24 • DO NOT connect a load to only 1 hook, which will cause the load to rotate during lifting and transport operations. Loads should connect to both hooks simultaneously. Load attached to only one hook (circled): load likely to rotate Load attached to both hooks: load rotation minimized Load Load Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 24 of 28...
- Page 25 Monthly Inspection INSPECTIONS section (p. 26). The boom should undergo load testing immediately after it is repaired, modified, or altered. Never modify the boom without first receiving written approval from Vestil. Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 25 of 28...
- Page 26 A “modification” is a change that alters the boom from original condition, like bending the structural members or removing parts. NEVER modify the boom without the express, written approval of Vestil. Modifications might make the boom unsafe to use and automatically void the LIMITED WARRANTY.
- Page 27 (on either fork pocket) Label # Model LM-OBT LM-OBNT LM-1T LM-EBT LM-HRT LM-EBNT LM-HRNT LM-1NT LMS-EBT LMS-EBNT Label 287 (on either fork pocket) Label 218 (on either fork pocket) Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 27 of 28...
- Page 28 Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.