Advertisement
Table of Contents
Receiving Instructions
After delivery, remove the packaging from the product. Inspect the product closely to determine
whether it sustained damage during transport. If damage is discovered, record a complete description
of it on the bill of lading. If the product is undamaged, discard the packaging.
Replacement Parts and Technical Service
For answers to questions not addressed in these instructions and to order replacement parts, labels,
and accessories, call our Technical Service and Parts Department at (260) 665-7586. The department
can also be contacted online at http://www.vestilmfg.com/parts_info.htm.
NOTE: The end-user is solely responsible for confirming that product design, use, and maintenance
comply with laws, regulations, codes, and mandatory standards applied where the product is used.
Signal
Words.........................................................................................................................
Hazards..................................................................................................................................
Assembly
Instructions................................................................................................................
Lifter
Configurations................................................................................................................
Using the
Lifter.........................................................................................................................
Record of Satisfactory
Inspections & Maintenance......................................................................................................4 - 5
Exploded View and Bill of
Specifications........................................................................................................................
Labeling
Diagram..........................................................................................................................
Limited
Warranty....................................................................................................................
Table of Contents
2999 North Wayne Street, P.O. Box 507, Angola, IN 46703
Telephone: (260) 665-7586 -or- Toll Free (800) 348-0868
Website:
Lifter-2 Worksite Lift
Instruction Manual
Table of Contents
Condition................................................................................................
Materials............................................................................................
Copyright 2019 Vestil Manufacturing Corp.
Rev. 6/24/2019
Vestil Manufacturing Corp.
Fax: (260) 665-1339
www.vestilmfg.com
LIFTER-2 MANUAL
e-mail:
info@vestil.com
Page 1 of 7
2
2
3
3
4
4
5
6
6
7
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Vestil Lifter-2
Summary of Contents for Vestil Lifter-2
- Page 1 Hazards………………….………………………………………………..………………………….…....Assembly Instructions……………..…………..………..………..………………………………………....Lifter Configurations…………………………………………………………………………………………………. Using the Lifter..…………………………………………………...……………………………………....Record of Satisfactory Condition…………………………………………………………………………………... Inspections & Maintenance…………………………………………………………………......4 - 5 Exploded View and Bill of Materials……………………….………………………………………………………. Specifications………………………………………………………………………………………………………… Labeling Diagram………..…………………………………………………………..........Limited Warranty…………………………………………………………………………………………………….. Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 1 of 7...
-
Page 2: Signal Words
HAZARDS Vestil strives to identify all hazards associated with the use of this product. However, material handling is dangerous and no manual can address every conceivable risk. The most effective means for preventing injury is for the end-user to exercise good judgment whenever using this device. - Page 3 Table of Contents Rev. 6/24/2019 LIFTER-2 MANUAL ASSEMBLY INSTRUCTIONS The Lifter-2 ships in fully assembled form. However, the lifter can easily be disassembled. Refer to the exploded view and bill of materials on p. 3, and then: 1. Disconnect the hook (on the winch cable) from the deck (5);...
-
Page 4: Inspections And Maintenance
Maintenance: Perform necessary maintenance after conducting an inspection to ensure that the lifter functions properly for as long as possible. Repair or replace all components that are not in satisfactory condition. Step 1 : Tag the lifter, “Out of Service.” Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 4 of 7... -
Page 5: Exploded View And Bill Of Materials
3/8” – 16 x 1” 37039 ” – 10 zinc-plated lock nut 21-042- Hand winch, foldable handle 002-001 grip PH-F-8/2-S-SWB-ST stem 16-132-204 caster 08-145-045 Clasp hook, ” hook opening Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 5 of 7... -
Page 6: Specifications
C: Label 527 (on back of B: Label 287 (by winch mounting A: Label 598 (on boom) deck backstop) bracket) D: Label 212 (on rear leg) E: Label 208 (on fore leg) Table of Contents Copyright 2019 Vestil Manufacturing Corp. Page 6 of 7... -
Page 7: Limited Warranty
Warrantee (you) for warranty service. Who may request service? Only a warrantee may request service. You are a warrantee if you purchased the product from Vestil or from an authorized distributor AND Vestil has been fully paid.
Need help?
Do you have a question about the Lifter-2 and is the answer not in the manual?
Questions and answers