Adjusting The Flash Output - Canon Powershot SX20 IS User Manual

Adjusting the Flash Output

In D mode, you can choose 3 levels of flash output.
To set the flash output, choose [Flash Control] (p. 97) from the 4 tab,
•
then choose [Flash Exp. Comp] and press the qr buttons to choose a
setting (p. 49).
In M and B modes, you can set the flash output if you choose the 4
•
tab, then [Flash Control] and set the [Flash Mode] option to [Manual].
Set the camera to D mode.
Choose the flash output.
After pressing the m button, press the
●
op buttons to choose ~.
Make the setting.
Press the qr buttons or turn the  dial
●
to choose an option, then press the m
button.
99