Canon Powershot SX20 IS User Manual: Setting The Date And Time

Canon powershot sx20 is: user guide.
Hide thumbs

Setting the Date and Time

The Date/Time settings screen will appear the first time the camera is turned
on. Since the dates and times recorded into your images are based on these
settings, be sure to set them.
Reappearing Date/Time screen
Set the correct date and time. If you have not set the date and time, the Date/
Time screen will appear each time you turn on the camera.
Daylight saving time settings
If you choose
, you will set the time to daylight saving (1 hour ahead).
Turn on the camera.
Press the power button.
The Date/Time screen will appear.
Set the date and time.
Press the qr buttons to choose an
Press the op buttons or turn the  dial
to set a value.
Make the setting.
Press the m button.
Once the date and time have been set,
the Date/Time screen will close.
Pressing the power button will turn off the
in Step 2 and press the op buttons or turn the  dial and


   Related Manuals for Canon Powershot SX20 IS

Comments to this Manuals

Symbols: 0
Latest comments:
  • s.kala May 15, 2017 04:46:
    I agree.note​worthy woodleys comment is more than 2 yrs old,but the worthies maintainin​g this user commentary are probably smirking in their sleeves, but not moving to correct/in​form harassed users of the facts.Nerd​s you can't rise above your self obsessed selves!Tac​h!
  • Janey Woodley Nov 14, 2014 02:05:
    This manual is virtually useless as the "butt​ons" repeatedly referred to are not identified and do not match any labeling on the camera.