Adjusting The Flash Exposure Compensation - Canon Powershot SX20 IS User Manual

Adjusting the Flash Exposure
Compensation
Just like with exposure compensation (p. 69), you can adjust the exposure
±2 stops in 1/3-stop increments when using the flash.
To set the flash exposure compensation, choose [Flash Control] (p. 97)
from the 4 tab, then choose [Flash Exp. Comp] and press the qr
buttons to choose a setting (p. 49).
Safety FE
The camera automatically changes the shutter speed or aperture value when the
flash fires to avoid overexposing and blowing out the highlights in the scene. In
the 4 tab, if [Safety FE] in [Flash Control] is set to [Off], the shutter speed and
aperture value will not automatically adjust.
98
Choose ~.
After pressing the m button, press the
●
op buttons to choose ~.
Make the setting.
Press the qr buttons or turn the  dial
●
to choose the flash exposure
compensation, then press the m button.
~ will appear on the screen.