Switching The Display - Canon Powershot SX20 IS User Manual

Information Displayed on the Screen

Switching the Display

You can change the display using the l button.
Shooting
You can change the displayed content. Closing the screen turns on the
viewfinder.
Screen (LCD Monitor)
Playback
No Information
Display
Closing the screen turns on the viewfinder.
You can also switch the display by pressing the l button while the
image displays shortly after shooting. However, Simple Information will
not display. You can set the display that appears first. Press the n
button to choose the 4 tab. Then set [Review Info].
Display in Dark Conditions during Shooting
The display automatically brightens when shooting in dark conditions,
allowing you to check the composition (Night Display function). However, the
brightness of the image on the screen, and the brightness of the actual
image recorded may be different. Screen noise may appear and the
movement of the subject may appear somewhat jagged on the screen. This
has no effect on the recorded image.
46
Simple Information
Display
Viewfinder
Detailed Information
Display
Focus Check Display
(p. 120)