Troubleshooting - Klarstein 10029781 Manual

1. To put the cabinet on open operation place;
2. The door opened to the maximum angle, take off the decorative nail on opposite side (Drawing 1);
3. To disassemble the pivot core of upper and lower door hinge by the inner six angle screwdriver (Drawing 2);
4. To suck out the door shaft core from the two ends of the top of the door by magnet (Drawing 3).
5. Take away the door from cabinet after discharge the door core.
6. Discharge the upper and lower door hinge by screwdriver (Drawing 4).
7. To assemble the door on the opposite side with accessories in accessory bag.
Problem
Wine cellar does not operate.
Wine cellar is not cold enough.
Turns on and off frequently.
The light does not work.
Vibrations.

Troubleshooting

Possible Cause
Not plugged in.
The appliance is turned off.
The circuit breaker tripped or the fuse is broken.
Check the temperature control setting.
External environment may require a higher setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The room temperature is hotter than normal.
A large amount of contents has been added to the Wine cellar.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
Not plugged in.
The circuit breaker tripped or a blown fuse.
The bulb is out of order.
The light button is "OFF".
Check to assure that the Wine cellar is level.
20