Klarstein 10029781 Manual page 12

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the following
hints to avoid damages. Any failure caused by ignoring the mentioned items and cautions mentioned in the
instruction manual are not covered by our warranty and any liability.
Technical Data 12
Safety Instructions 12
Installation 13
Use and Operation 15
Control Panels and Controls 16
Maintenance and Modifications 18
Troubleshooting 19
Hints on Disposal 20
Declaration of Conformity 20
Item number
Power supply
• During transportation and installation, ensure that the tubing of the refrigerant circuit is not damaged.
• Avoid using or manipulating sharp objects near by the appliances.
• Leaking refrigerant can ignite and may damage the eyes.
• In the event any damage does occur, avoid exposure to open fires and any device which creates a spark.
Disconnect the appliance from the mains power.
• Thoroughly ventilate the room in which the appliance is located for several minutes.
• Notify Customer Service for necessary action and advice.
• It is hazardous for anyone other than an Authorised Service Person to carry out servicing or repairs to this appliance.
• Keep ventilation openings in the appliance enclosure or in the built-in structure clear of obstruction.
• Do not use mechanical devices or other means to accelerate the defrosting process.
• Do not use electrical appliances inside the food storage compartments of the appliance.
• If you do not use the machine for a long time, please unplug the power plug from the socket or switch off
the power supply.
• This appliance is not intended for use by persons (including children)
• with reduced Physical, sensory or mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of the appliance by a person responsible for their
safety; Children should be supervised to ensure that they do not play with the appliance;
• Do not use extension cords or ungrounded (two prong) adapters;
• If the supply cord is damaged, it must be replaced by the manufacturer, Its service agent or similar qualified
person in order to avoid hazard.
Contents
Technical Data
10029781, 10029782, 10029783
220-240 V ~ 50-60 Hz
Safety Instructions
12