Table of Contents
Advertisement
Chip Compoments Rework Process using Tweezers and Pedal
The Adjustable Nano Tweezers is the most effective tool for desoldering chip components but also it
facilitates its rapid placement and soldering by using the P-405 pedal connected to the station.
1
2
* Previously Press Mode selected
8
Connections
Pedal
Ref. P-405
Connect pedal P-405 to the same port where the Nano
Tweezers are connected.
In the peripherals menu for the Pedal Activation Mode
choose between "pressed" and "released".
Desoldering*
Lift the tool from the holder, press and hold the pedal to
activate the tool and desolder the component.
Once the pedal is released the tool enters en Hibernation
Mode and cools down.
Advertisement
Table of Contents
