Packing List The following items should be included: JTSE Control Unit .... 1 u DDE Control Unit ....1 u Electric Ref. JTSE-1A (100V - 120V) Ref. DDE-1C (120V) Desoldering Module ..1 u JTSE-2A (230V) DDE-2C (230V) Ref. MSE-A DDE-9C (100V) Stand ........
Page 3
w w w.jbctools.com JT Accessory set Ref. 0012332 Extractor stand* ... 1 unit Extractors* Tripod* Ref. 0008752 Ref. E2184 Ref. T2050 E2064 (Ø 39mm) E2052 T2250 (Ø 85mm) Protectors* Suction Tube* Ref. P2220 Ref. 0932330 P2230 P2235 P4000 P4010 ESD Tip Cleaner ... 1 unit Suction Cups* Nozzles Ref.
Page 4
DR560 Accessories Ref. 0010211 Tip cleaning set ........1 unit Long Tip Cleaning set ....... 1 unit Ref. 0965970 Ref. 0965760 Tips ......3 units Glass solder Spanner ....1 unit Ref. C560005 (x1) collector ......1 unit Ref. 0780550 Ref.
w w w.jbctools.com Pick & Place ....1 unit Bent Needles Set ..1 unit Straight Needles Set ... 1 unit Ref. T260-A Ref. 0861660 Ref. 0901546 Thermocouple Cups Set ......1 unit Cleaning stick ....1 unit Type K ......1 unit Ref.
Page 6
JTSE Features Thermocouple type K Ref. PH218 USB-A connector Heating element Activates the suction pump Hot Air button (On / Off) Suction Tube For tripods and extractors Heater Hose set Ref. JT-T1A (100V/120V) JT-T2A (230V) JTSE Connection Stand Ref. JT-SE Auxiliar connector Equipotential...
Page 7
w w w.jbctools.com DDE Features 2,8” Color TFT screen USB-A connector Tilt the display for easy reading MSE Features LED status indicators Filter cover...
Page 8
DDE & MSE Connections Work simultaneously with up to 2 tools and join each station port with 1 module + 1 pedal (Peripherals). Control Unit Ref. DDE-C General purpose handle Ref T245-A Stand Ref. AD-SE Equipotential connection Stand Ref. DR-SE USB-B connector RJ12 connector for Robot Power Socket...
Page 9
w w w.jbctools.com DDE Compatibility Select the equipment that best suit your soldering or desoldering needs. Basic working system Peripherals** Control Cartridge MSE-A / Tool Stand MNE-A FSE-A P-005 Unit Range MVE-A T210-A C210 T245-A C245 AD-SE T470-A C245 T210-NA* C210 T245-NA* DN-SE...
2. Press the new fuse into the fuse holder and If necessary use a tool to lever it off. replace it in the station. - Replace any defective or damaged pieces. Use original JBC spare parts only. - Repairs should only be performed by a JBC authorized technical service.
Page 11
w w w.jbctools.com Safety It is imperative to follow safety guidelines to prevent electric shock, injury, fire or explosion. - Do not use the units for any purpose other than soldering or rework. Incorrect use may cause fire. - The power cable must be plugged into approved bases. Make sure that it is properly grounded before use.
Warranty JBC’s 2 year warranty covers this equipment against all manufacturing defects, including the replacement of defective parts and labour. Warranty does not cover product wear or misuse. In order for the warranty to be valid, equipment must be returned, postage paid, to the dealer where it was purchased.