Language Selection; Selecting A Soldering Tool; Setting The Temperature - ersa i-CON 1V Quick Manual

Functional description
3.2 Language selection
To select your national language, proceed as follows:
3.3 Selecting a soldering tool
3.4 Setting the temperature
6
1 2
OFF
■
To set the desired soldering tip temperature, turn the i-OP.
■
Press the i-OP to apply the setting.
3BA00253-01
■
switch off the soldering station
■
press and hold the i-OP
■
switch back on the soldering station
■
hold the i-OP until you hear a beep, then let go.
3
5 s
ON
■
Select the [Change] item by turning the i-OP.
■
Select the [Language] menu item.
■
Press the i-OP.
■
Select the required national language by turning the
i-OP.
■
Press the i-OP.
■
Select the [** END **] menu item, then press the i-OP.
The national language has been changed.
■
Select the desired soldering tool by pressing the i-OP.
Pressing the i-OP repeatedly will enable the soldering
tool connected to the left or to the right.
2021-05-17 Rev. 1
• •
♪
4
Ersa i-CON 1V & i-CON 1VC