Nortel NT1R20 Description page 193

Table of Contents

Advertisement

Table 44
MMI commands and command sets (Part 1 of 2)
Command
A D
A E
C A
C A L
C E
D A(P)
D C(P)
D H(P)
D P
D S(P)
H or ?
NT5D33 and NTRB34 Line-side E1 Interface Cards
Each of these commands can be executed by entering the first letter of the
command or by entering the entire command. Commands with more than one
word are entered by entering the first letter of the first word, a space, and the
first letter of the second word or by entering the entire command. Table 44
shows all possible MMI commands in alphabetical order. These commands
are also described by subject later in this section.
Alarm Disable. Disables all alarms.
Alarm Enable. Enables all alarms.
Clear Alarm. Clears all alarms, terminates time processing, and resets
the E1 bit error rate and frame slip counters.
Clear Alarm Log. Clears alarm log.
Clear Error. Clears the E1 error counter.
Display Alarms. Displays the alarm log, which is a list of the 100 most
recent alarms with time and date stamps. (Momentarily stop the scrolling
display by typing P . Continue scrolling by typing any other key.)
Display Configuration. Displays the configuration settings for your
LEI(s), single- or multiple-card system. Display includes each card's
serial number, MMI firmware version, date and time, alarm diable/enable
setting, self-clearing diable/enable setting, values entered through the
Set Configuration command, and dip switch settings.(Momentarily stop
the scrolling display by typing P . Continue scrolling by typing any other
key.)
Display History. Displays performance counters for the past 24 hours.
(Momentarily stop the scrolling display by typing P . Continue scrolling by
typing any other key.)
Display Performance. Displays performance counters for the current
hour.
Display Status. Displays carrier status, including alarm state and, if
active, alarm level. (Momentarily stop the scrolling display by typing P .
Continue scrolling by typing any other key.)
Help. Displays the Help screen.
Description
Line cards Description
Page 169 of 290

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nt5d11Nt5d33Nt8d02Nt8d09Qpc192Qpc452 ... Show all

Table of Contents