Nortel NT1R20 Description page 136

Page 112 of 290
553-3001-105 Standard 5.00 June 1999
NT5D11 Line-side T1 Interface Card
If you type ?<CR>, the MMI will list these commands along with an
explanation of their usage A screen similar to the following will appear (the
help screen will also appear by typing H<CR>, or HELP<CR>):
ALARM USAGE: Alarm [Enable | Disable]
CLEAR USAGE: Clear [Alarm] | [Error counter] [Log]
DISPLAY USAGE: Display [Alarm | Status | Perform | History] [Pause]
HELP USAGE: Help | ?
SET USAGE: Set [Time | Date | Alarm | Clearing | Name | Memory]
TEST USAGE: Test [Carrier All]
QUIT USAGE: Quit
Notation Used:
CAPS - Required Letters
Each of these commands can be executed by entering the first letter of the
command or by entering the entire command. Command sets are entered by
entering the first letter of the first command, a space, and the first letter of the
second command or by entering the entire commands. Table 27 shows all the
possible command sets, listed in alphabetical order. These commands are also
described by subject later in this section.
[ ] - Optional | - Either/Or