Troubleshooting - Silvercrest SSBS 3.0 A1 Manual

Troubleshooting

The remote trigger 8 does not turn on.
► The inserted battery is dead . Replace the battery (see chap-
ter on Inserting/replacing battery) .
Unable to connect via Bluetooth
The Bluetooth
►
Enable the Bluetooth
more information, refer to the operating instructions of your
phone .
► The remote trigger 8 is too far away from the smartphone .
Make sure that the remote trigger 8 is no farther than
32 .8 feet from the smartphone .
► Your smartphone may use an unsupported operating system .
Check the operating system version on your smartphone
(for supported operating systems, refer to the chapter on
Technical specifications) .
No picture is taken when the
► Each manufacturer assigns the keys in their camera app
themselves . As a result, a variety of malfunctions can occur
when pressing the
may zoom in instead of taking a picture . If this is the case,
check the operating system settings to see whether there
is an option to use the volume control (+) as an additional
trigger button .
The power LED 0 flashes red in one second intervals.
► The battery in the remote trigger 8 is dead and must be
replaced (see chapter on Inserting/replacing battery) .
SSBS 3.0 A1
® function is disabled on the smartphone .
® function on your smartphone . For
button q . For example, the camera
.
®
button q is pressed.
US-EN
│ 11 ■