Playing Back The Added Sound - Canon MVX3 Instruction Manual

7. Press the STOP 3 button on the wireless controller
to stop dubbing.
Audio device: Stop playback.
E
Set the zero set memory at the end of the scene you wish to dub audio. The
camcorder will automatically stop audio dubbing at that point.

Playing Back the Added Sound

You can select to play back Stereo 1 (original sound), Stereo 2 (added sound), or adjust
the balance of both sounds.
CAMERA
1. Press the 12bit AUDIO OUT button on the wireless
controller.
• The setting changes with each press of the button.
• STEREO1: Plays back the original sound.
• STEREO2: Plays back the added sound.
• MIX/FIXED: Plays back stereo 1 and stereo 2 in the same level.
• MIX/VARI.: Plays back stereo 1 and stereo 2. The mix balance can be adjusted.
2. If you have selected [MIX/VARI.], adjust the mix
balance with the ST-1/ST-2 buttons on the wireless
controller.
• A bar showing the balance appears for 4 seconds.
• Press the ST-1 button to increase the volume of Stereo 1 and the ST-2 button to
increase the volume of Stereo 2.
The camcorder resets to [STEREO1] when you turn the camcorder off. However,
the mix balance is memorised by the camcorder.
106
PLAY (VCR)
CARD CAMERA
PAUSE REW PLAY FF
ZERO SET
/ STOP /
MEMORY
×
AUDIO DUB. 2
PAUSE SLOW
MENU SET
AV INSERT AV DV
CARD CAMERA
SELF T.
SEARCH SELECT
12bit
MIX BALANCE
TV SCREEN
AUDIO OUT ST-1 ST-2
CARD
DATA CODE
PLAY MODE D.EFFECTS ON/OFF
CARD SLIDE SHOW
SELF T.
SEARCH SELECT
12bit
MIX BALANCE
TV SCREEN
AUDIO OUT ST-1 ST-2
CARD
DATA CODE
D.EFFECTS ON/OFF
PLAY MODE
CARD SLIDE SHOW