Canon MVX3 Instruction Manual page 103

Example: AV Insert from a VCR
CAMERA
1. Connect the camcorder to the VCR.
See Playing Back on a TV Screen (
2. VCR: Load a recorded cassette. Locate the scene you wish to insert and
pause playback shortly before the scene.
3. Set the camcorder to PLAY (VCR) mode and load a recorded cassette.
Make sure the tape-protect switch is set to allow recording.
4. Locate the scene you wish to replace and pause playback shortly before
the scene.
You can use the playback buttons on the camcorder or the special playback buttons on
the wireless controller.
5. Press the AV INSERT button on the wireless
controller.
"AV INSERT" and "2a" appear.
6. VCR: Play back the tape.
7. Press the PAUSE a button on the wireless controller
when the scene you wish to insert appears.
8. Press the STOP 3 button on the wireless controller
to stop inserting.
Press the PAUSE a button on the wireless controller to pause
inserting.
9. VCR: Stop playback.
Set the zero set memory at the end of the scene you wish to replace. The
camcorder will automatically stop AV insert at that point.
PLAY (VCR)
38).
CARD CAMERA CARD CAMERA
×
2
AUDIO DUB. PAUSE SLOW
MENU SET
AV INSERT AV DV
REMOTE SET
ZERO SET
/ STOP /
MEMORY
×
2
AUDIO DUB. PAUSE SLOW
MENU SET
AV INSERT AV DV
PAUSE
REW PLAY FF
ZERO SET
/ STOP /
MEMORY
×
2
AUDIO DUB. PAUSE SLOW
MENU SET
AV INSERT AV DV
E
103