Mirror Printing Function - Brother P-touch 2600, 2610 User Manual

EXAMPLE
To select the RIGHT horizontal alignment setting:
1
While holding down
c
keep
2
While still holding down
R
until RIGHT is displayed.
c
3
Release
This function prints your label so that the text can be read from the adhesive side of the tape. If
mirror-printed labels are attached to glass or some other transparent material, they can be read
correctly from the opposite side.

When using the Mirror printing function, the text should be printed on CLEAR TAPE.
The default mirror printing setting is OFF.
When the Mirror printing
function is set to ON:
To change the mirror printing setting:
1 While holding down c, press p once, and keep c held down to display the cur-
rent mirror printing setting.
2 While still holding down c, continue pressing p until the desired mirror printing set-
ting is displayed.
3 Release c to apply the selected mirror printing setting to the entire text.
86
c
, press
held down.
c
, continue pressing
.

MIRROR PRINTING FUNCTION

R
once, and